East Lothian · Scotland
Bath Re-enamelling for Spott homes
Local bath re-enamelling for Spott: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Chips and rust in more than one place
How we handle bath re-enamelling in Spott
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include an outdated colour you’d like to change and enamel that’s lost its shine and feels rough, in basins & shower trays, pressed steel baths and Victorian roll-tops.
All our work comes with our one-year guarantee, wherever you are in East Lothian.
- Location
- Spott (EH42)
- Area hub
- East Lothian
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed:
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Common questions in Spott
Do you work in Spott?
We do. We send a technician to Spott for every job, with no extra charge for travel.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
How do I get a price for bath re-enamelling in Spott?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
When to call us in Spott
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Look out for these signs:
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- Staining under the taps and around the waste
- An outdated colour you’d like to change
What to look for in a quote
- What aftercare is recommended
- How the colour is matched
- If travel is included in the price
- The length of the guarantee and what it covers
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Ensure the area is dry
- Keep children and pets away from the room on the day
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Repairing versus replacing in Spott
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
What you get with us
- One price list for the entire UK
- Rooms protected and left tidy
- No need to remove anything
- Work done at your home or business
Take a look at our full price list or guide to resurfacing and replacement costs.
About Spott
Spott is about 10 miles east of Haddington, in East Lothian. Whether you’re in the middle of Spott or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 48 towns and villages across East Lothian. Our nearest city page is Edinburgh, about 27 miles away.
Our repair technicians cover all of EH42. Streets in the area include Canongate, High Road and St John Street, all of which we cover. Close by, we cover Broxburn (2 miles north-east), Dunbar (2 miles north), West Barns (2 miles north-west), Bielside (2 miles north-west) and Belhaven (2 miles north). Larger places within reach include Haddington (10 miles west), North Berwick (10 miles north-west), Longniddry (14 miles west), Gullane (13 miles west), East Linton (5 miles west) and Aberlady (13 miles west).
Around Spott
Typical jobs here are in homes near Session House and Graveyard. For rail, the closest station is Dunbar station, roughly 1.9 miles north. Nearby you’ll also find Dunbar Castle (2.4 miles north) and Dunbar Town House Museum and Gallery (2.2 miles north). Open spaces near Spott include Doon Hill.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Towns and villages near Spott
More services for Spott
About our accreditations · Every repair comes with a one-year guarantee.
