Telford and Wrekin · England
Bath Re-enamelling in St George’s
Problem with your bath in St George’s? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- An old resurfacing that is failing
Bath re-enamelling in St George’s, done in place
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for an outdated colour you’d like to change and an old resurfacing that’s failing, in acrylic baths, cast iron baths and pressed steel baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- St George’s (TF2)
- Area hub
- Telford and Wrekin
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- A year’s guarantee on all work
- No extra charge for your area
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
See our full price list and resurfacing vs replacement cost guide.
About St George’s
St George’s is about 1 mile east of Telford, in Telford and Wrekin. Wherever you are in the TF2 postcode area, a technician comes to you. Our technicians cover 79 places across Telford and Wrekin. Our nearest city page is Birmingham, about 28 miles away.
Our repair technicians cover all of the TF2 postcode area and the streets around it. That includes homes on Union Road, Fox Avenue and Pains Lane. Close by, we cover Oakengates (1 mile west), Snedshill (1 mile south), Priorslee (1 mile south-east), Telford (1 mile west) and Old Park (1 mile south-west). Within a short drive, we also cover Wellington (3 miles west), Dawley (3 miles south-west), Newport (6 miles north-east), Stirchley (3 miles south), Dothill (4 miles west) and Sutton Hill (5 miles south). As one of the bigger places in Telford and Wrekin, St George’s is somewhere we visit frequently.
Local landmarks in St George’s
Locally, our jobs take us to homes close to Church of St George, Telford Town Park and The Telford Priory School and the streets around them. Also close by are Spice of India pub (within half a mile east), Holy Trinity Academy (1.3 miles south-east) and St George's Church of England Primary School (less than half a mile south-east). For rail, the closest station is Oakengates station, roughly 0.5 miles south-west. Other landmarks nearby include Lilleshall (2.9 miles north-east) and Telford Shopping Centre (1.3 miles south). Green spaces nearby include The Ercall.
What else we do in St George’s
Common questions in St George’s
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you cover St George’s?
Yes. We work across the UK and travel to St George’s and the rest of Telford and Wrekin. Send us pictures for a fixed quote, or call 0345 017 0787.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in St George’s.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us if there are stairs or a lift
- Clear the area around the damage
- Keep pets and children out of the room while we work
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Advice
What affects the price in St George’s
Resurfacing from £350. We do not charge extra for travel to St George’s. The price comes down to:
- What the surface is made of
- Unusual colours or finishes
- How easy the damage is to reach
- Previous DIY repairs that have to come out
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Something in shot to show the size
- What it’s made of, if you know
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
How to care for the repair
So the finish stays in good condition for years:
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
When to call us in St George’s
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- Worn patches where water runs and sits
- An old resurfacing that is failing
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
Comparing quotes
- What happens if they find more damage
- How the room is protected while they work
- A fixed price, and whether VAT is included
- How to look after the finish
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
What we cannot put right
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer before booking.
Materials we work on in St George’s
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
