Telford and Wrekin · England
Bath Re-enamelling for Old Park homes
Fixed-price bath re-enamelling in Old Park and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
Keeping it looking good
Once the work has cured, treat it gently:
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Fix dripping taps quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Bath re-enamelling at your home in Old Park
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. Our repair technicians work on basins & shower trays, cast iron baths and Victorian roll-tops, and people most often call us about worn patches where water runs and sits and a roll-top that’s seen better days.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Old Park (TF3, TF2, TF4)
- Area hub
- Telford and Wrekin
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take a full day, and we’ll tell you if anything changes.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
Ask for a price
Email us pictures of the damage and a wider shot of the entire item, and tell us you’re in Old Park, and we’ll come back with a fixed quote.
Advice
What else we do in Old Park
About Old Park
Old Park is about 1 mile south-east of Telford, in Telford and Wrekin. From the centre of Old Park to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Old Park is one of 79 places in Telford and Wrekin we cover. Our nearest city page is Birmingham, about 28 miles away.
Jobs in TF3, TF2 and TF4 work the same way as everywhere else we cover. That includes homes on Park Lane, West Road and Main Road and the roads around them. Old Park is on the M54 and A442, which makes it straightforward to reach. We also travel to Telford (1 mile north-west), The Rock (1 mile south-west), Newdale (1 mile west), Malinslee (1 mile south) and Oakengates (1 mile north). Larger places within reach include Wellington (3 miles north-west), Newport (7 miles north-east), Dothill (4 miles north-west), Sutton Hill (4 miles south), Shawbirch (4 miles north-west) and Woodside (3 miles south).
What’s near Old Park
Typical jobs here are in homes near Holy Trinity Church, The Telford Priory School and Queenswood Primary School and Nursery, among other places. Other local landmarks include Telford Town Park (0.9 miles south-east) and Pear Tree Bridge Inn (0.6 miles north). For rail, the closest station is Telford Central station, about 0.7 miles east of the centre. Nearby you’ll also find Museum of The Post Office In The Community (3.8 miles south) and Telford Shopping Centre (0.6 miles south-east). For a walk, there is The Ercall.
Common problems we fix in Old Park
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- An old resurfacing that is failing
- Wear marks under the taps
- Lots of chips and rust spots
- A coloured bath you want in white
Questions to ask before you book
- How changes to the job are handled
- How the colour is matched
- Whether there are any call-out or travel charges
- How soon you can use it again
Old Park: your questions answered
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Which areas do you work in?
All of Telford and Wrekin, and the rest of the UK. Travel is included in the price.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Old Park.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Do you resurface freestanding baths?
Yes. Inside and out.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Old Park
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What affects the price in Old Park
Prices start from £350. We price every job individually, from your photos. The main factors are:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed quote
Two or three clear pictures are usually enough. It helps if you send:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- One picture of the entire bath
To get a price, send two or three pictures using our quote form or ring us. We’ll say right away whether it can be repaired.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Landlord and trade work in Old Park
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
