Herefordshire · England
Bath re-enamelling & resurfacing in St Margarets, Herefordshire
Bath re-enamelling for St Margarets, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that’s failing
How we handle bath re-enamelling in St Margarets
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s several chips and rust patches and a bath that stays dull however much you clean it, we can usually put it right.
Your repair is guaranteed for a year, as with every job we do.
- Location
- St Margarets (HR2)
- County
- Herefordshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering St Margarets
St Margarets is about 10 miles south-west of Hereford, in Herefordshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. St Margarets is one of 255 places in Herefordshire we cover. Our jobs stretch from St Margarets to Birmingham (55 miles away).
All of HR2 is covered. If you are just outside St Margarets, we cover Bacton (1 mile south-east), Lower Maes-coed (2 miles south), Abbey Dore (3 miles south-east), Longtown (3 miles south-west) and Clodock (4 miles south-west). Within a short drive, we also cover Hereford (10 miles north-east), Redhill (10 miles east), Newton Farm (9 miles east), Whitecross (10 miles north-east), Eign Hill (11 miles east) and Widemarsh (10 miles north-east).
Local landmarks in St Margarets
In St Margarets, that means homes near Church of St Margaret, among other places. Well-known places in the area include Chanstone South Tump (1.5 miles north-east). For a walk, there’s Newbarns Hill and The Parks.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Landlord and trade work in St Margarets
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
Common problems we fix in St Margarets
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Keep an eye out for these signs:
- Several chips and rust patches
- A roll-top that’s seen better days
- A coating lifting around the plughole
- An outdated colour you’d like to change
What to look for in a quote
- How long the guarantee is and what it covers
- How your room will be protected
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- A cast iron or steel bath that’s cracked right through
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in St Margarets
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
What happens on the day
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you can get on with other things while we’re there.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Open a window if you can
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Also near St Margarets
Other services in St Margarets
St Margarets questions
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
How long will the bath be out of use?
Normally one day, with the bath ready the day after. A badly pitted bath can need a second day.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Do you cover St Margarets?
We do. We send a technician to St Margarets for every job, with no extra charge for travel.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we take into account:
- Access to the area
- The type of damage
- The size and number of damaged areas
- The colour and finish to match
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- A coin or ruler next to the damage for scale
- Any details about the material
- A photo taken from further back
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
