Staffordshire · England
Bath Re-enamelling for Stadmorslow homes
Fixed-price bath re-enamelling in Stadmorslow and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
Bath re-enamelling at your home in Stadmorslow
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s chips and rust in more than one place and a bath that stays dull however much you clean it, we can help, whatever the material.
All our work comes with a one-year guarantee, wherever you are in Staffordshire.
- Location
- Stadmorslow (ST8, ST7)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Stadmorslow
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
What affects the price in Stadmorslow
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How hard the colour is to match
- How many areas need work
- Access to the area
- How many items we do on one visit
The price reflects the work involved, not where you live. You will see the full price before you book.
Quotes from your pictures
Two or three clear photos are usually enough. It helps if you send:
- A coin or ruler next to the damage for scale
- The material, if you know it
- Where you are, by postcode
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Signs you need bath re-enamelling in Stadmorslow
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Signs it’s time to call us include:
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Before booking anyone
- How to look after the finish
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- What happens if they find more damage
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Stadmorslow as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
About Stadmorslow
Stadmorslow is about 2 miles south-west of Biddulph, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Stadmorslow is one of 512 places in Staffordshire we cover. Our nearest city page is Manchester, about 26 miles away.
Jobs in ST8 and ST7 are booked in the same way as anywhere else. Neighbouring places we cover include Bemersley Green (1 mile south-east), Ridgeway (1 mile south-east), Chell (2 miles south), Brown Edge (2 miles south-east) and Norton le Moors (3 miles south-east). Larger places within reach include Newcastle-under-Lyme (6 miles south), Longton (8 miles south), Stone (14 miles south), Leek (7 miles east), Alsager (5 miles west) and Cheadle (11 miles south-east).
Around Stadmorslow
Locally, our jobs take us to homes close to Biddulph High School, Packmoor Ormiston Academy and St James the Apostle. The closest station to Stadmorslow is Kidsgrove station, about 2.3 miles west of the centre. Nearby you will also find Haywood Hospital (2.6 miles south) and Mow Cop Chapel Museum (1.4 miles north-west). Not far away are Bignall Hill and Limekiln Wood Nature Reserve.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Common questions in Stadmorslow
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
How much does bath re-enamelling cost in Stadmorslow?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Repair or replace: which is better?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Stadmorslow clients choose us
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
- Most jobs done in one visit
- We leave the room as we found it
See our prices page or guide to resurfacing and replacement costs.
Also near Stadmorslow
What else we do in Stadmorslow
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Open a window if you can
How to get a price
Most customers in Stadmorslow get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Related advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
About our accreditations · Every repair comes with a one-year guarantee.
