Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Stamford Bridge, Cheshire West and Chester
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Stamford Bridge. Send photos for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that’s seen better days
Stamford Bridge and the surrounding area
Stamford Bridge is about 4 miles east of Chester, in Cheshire West and Chester. Across the CH3 area, we come to you. We cover 224 places across Cheshire West and Chester, from the larger towns to small villages. Our jobs stretch from Stamford Bridge to Liverpool (about 15 miles away).
Our technicians cover all of CH3 and the streets around it. Neighbouring places we cover include Great Barrow (1 mile north), Tarvin Sands (2 miles east), Broomhill (2 miles north), Ashton Hayes (3 miles north-east) and Mouldsworth (3 miles north-east). Larger places within reach include Chester (4 miles west), Ellesmere Port (7 miles north-west), Winsford (11 miles east), Northwich (12 miles east), Neston (13 miles north-west) and Boughton (4 miles west).
Near you in Stamford Bridge
Typical jobs here are in homes near Christleton High School, Barrow CofE Primary School and St Bartholomew's Church and the streets around them. The closest station to Stamford Bridge is Mouldsworth station, roughly 3.4 miles north-east of the centre. Well-known places in the area include Chester Motor Museum (3.1 miles west) and Horton-cum-Peel (2.4 miles north-east). Green spaces nearby include Hockenhull Platts.
Bath re-enamelling in Stamford Bridge, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s a period or roll-top bath worth keeping and worn patches where water runs and sits, we can generally put it right, whatever the material.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Stamford Bridge (CH3)
- County
- Cheshire West and Chester
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Stamford Bridge
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Stamford Bridge, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Plan for a full day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Related advice
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing usually wins. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Stamford Bridge. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Everything repaired in place
- Every repair guaranteed for a year
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
Read our prices page or bath cost comparison.
Places near Stamford Bridge
More services for Stamford Bridge
Looking after it afterwards
How the surface is treated afterwards matters:
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
- Have chips seen to early
- Respect the curing time we give you
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Stamford Bridge: your questions answered
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Which areas do you work in?
Everywhere in the UK, Stamford Bridge included. There is no extra charge for travel.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What we’re called out for in Stamford Bridge
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Typical reasons for a call-out include:
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
Comparing quotes
- A fixed price, and whether VAT is included
- How the colour is matched
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the photos show
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
