Staffordshire · England
Bath re-enamelling & resurfacing in Stanley Moor, Staffordshire
Problem with your bath in Stanley Moor? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
How we handle bath re-enamelling in Stanley Moor
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We are frequently asked to fix staining under the taps and around the waste and an old resurfacing that’s failing, across Victorian roll-tops, pressed steel baths and basins & shower trays.
All of our repairs are guaranteed for twelve months in Stanley Moor and everywhere else. If something goes wrong with the work, we come back.
- Location
- Stanley Moor (ST9)
- Area hub
- Staffordshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Stanley Moor
Prices start from £350. We price every job individually. The main factors are:
- The material
- The type of damage
- Unusual colours or finishes
- Where the damage is and how we get to it
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Most quotes are done from photos alone. To make it quick:
- Natural light rather than flash
- A coin beside the damage so we can judge size
- A photo taken from further back
- The material, if you know it
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Places near Stanley Moor
More services for Stanley Moor
Honest limits
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
When to call us in Stanley Moor
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
If you can see any of these, send us a picture:
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- Stains that will not shift
- A coloured bath you want in white
What to look for in a quote
- Who turns up on the day
- What preparation is included
- How to care for the finish
- How the colour is matched
Repairing versus replacing in Stanley Moor
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why book with us
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
- A fixed quote before booking
See our pricing and resurfacing vs replacement cost guide.
Stanley Moor and the surrounding area
Stanley Moor is about 4 miles north-east of Stoke-on-Trent, in Staffordshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Stanley Moor is one of 512 places in Staffordshire we cover. You can also see our page for Manchester, about 29 miles away.
Postcode districts we cover here: ST9. Local streets include Stanley Road, Clewlows Bank and The Avenue, all of which we cover. Close by, we cover Stanley Moss (1 mile north), Stanley (1 mile north-east), Stockton Brook (1 mile north-west), Bagnall (1 mile south-east) and Baddeley Green (1 mile west). We also work in nearby towns such as Newcastle-under-Lyme (6 miles south-west), Longton (5 miles south), Stone (12 miles south), Leek (5 miles north-east), Biddulph (4 miles north-west) and Alsager (8 miles west).
What’s near Stanley Moor
Typical jobs here are in homes near Endon High School, Church of St Chad and Stafford Arms Public House And St Chad's House, among other places. For rail, the closest station is Longport station, roughly 4.4 miles west. A little further out are Haywood Hospital (3.1 miles west) and The Potteries Centre (3.5 miles south-west). Not far away are Westport Lake.
- Other local spots include Abbey Green (1.7 miles south-west)
Stanley Moor: your questions answered
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How long is the bath unusable?
Usually one day, with the bath ready the day after. A badly pitted bath can need a second day.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Stanley Moor, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
What happens on the day
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for the best part of a day. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
Get a quote
For a price in Stanley Moor, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
