Nottinghamshire · England
Bath Re-enamelling in Stanton Hill
Full bath re-enamelling and resurfacing for homes and businesses in Stanton Hill and across Nottinghamshire. Send photos for a free, fixed quote.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that don’t clean off
Bath re-enamelling in Stanton Hill without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We’re often asked to fix an original cast iron bath that needs restoring and a bath that stays dull however much you clean it, in Victorian roll-tops, pressed steel baths and acrylic baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Stanton Hill (NG17)
- Region
- Nottinghamshire
- Guarantee
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
After the repair has cured, a few habits help it last:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Stanton Hill: your questions answered
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What areas do you cover?
We cover the whole UK, including Stanton Hill and the rest of Nottinghamshire. Send your postcode with your photos and we will confirm dates.
Do you come to Stanton Hill?
We do. Repair technicians travel to Stanton Hill from across the region, with no extra charge for travel.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
What you get with us
- Technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
- No need to remove anything
Read our pricing or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Stanton Hill. The price reflects:
- How hard the colour is to match
- How many items we do on one visit
- The material
- How much damage there is
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
You can usually get a fixed price without us visiting. To help us price it:
- Any earlier repairs or coatings
- What it’s made of, if you know
- A close-up of the damage, in focus
- A picture taken from further back
If you are in Stanton Hill and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Make sure the area is dry
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
About Stanton Hill
Stanton Hill is about 1 mile north-west of Sutton in Ashfield, in Nottinghamshire. Whether you’re in the middle of Stanton Hill or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Stanton Hill is one of 329 places in Nottinghamshire we cover. We work right across the region, from Stanton Hill to Manchester (about 45 miles away).
We work across the NG17 postcode area. You will find streets such as High Street, Welbeck Square and Morley Street, all of which we cover. We also cover the places around Stanton Hill: Skegby (1 mile north-east), Fackley (1 mile north-west), Teversal (1 mile north), Sutton in Ashfield (1 mile south-east) and Eastfield Side (1 mile south-east). Further out, we also cover Mansfield (4 miles east), Beeston (15 miles south), Carlton (14 miles south-east), Worksop (14 miles north-east), Hucknall (8 miles south) and Mansfield Woodhouse (4 miles north-east).
What’s near Stanton Hill
We visit homes around All Saints' Church, Quarrydale Academy and Healdswood Infants' and Nursery School, among other places. The nearest railway station is Sutton Parkway station, roughly 2.3 miles south-east of the centre. Well-known places in the area include Stainsby Mill (3.4 miles north-west) and King's Mill Hospital (1.9 miles east).
Do you need bath re-enamelling in Stanton Hill?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Customers usually contact us about:
- Enamel that’s lost its shine and feels rough
- An outdated colour you’d like to change
- A roll-top that is seen better days
- Worn patches where water runs and sits
Questions to ask before you book
- Whether the price is fixed and includes VAT
- Aftercare advice
- How changes to the job are handled
- What the guarantee covers, and for how long
Places near Stanton Hill
Also in Stanton Hill
Work for landlords and builders
For anyone letting property in or around Stanton Hill, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
