North Yorkshire · England
Bath Re-enamelling for Starbotton homes
We travel to Starbotton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that do not clean off
What bath re-enamelling costs
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- Doing more than one item at once
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- A photo taken from further back
For a price in Starbotton, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Bath re-enamelling in Starbotton without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Whether it’s a coloured bath you want in white and an old resurfacing that’s failing, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Starbotton (BD23)
- Area hub
- North Yorkshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath re-enamelling in Starbotton
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
The most common problems we are called about are:
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
- A coloured bath you want in white
- A roll-top that’s seen better days
Comparing quotes
- How soon you can use it again
- How the colour is matched
- If travel is included in the price
- How to care for the finish
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Starbotton questions
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Someone resurfaced my bath and it’s peeling. Can you help?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How long does re-enamelling take?
Normally one day, with the bath ready the next day. A badly pitted bath can need a second day.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Do you work in Starbotton?
We do. Technicians travel to Starbotton from across the region, and the price is the same as everywhere else.
What areas do you cover?
All of North Yorkshire, and the rest of the UK. Travel is included in the price.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Related advice
Places near Starbotton
More services for Starbotton
Work for landlords and builders
Landlords, letting agents and housing providers in Starbotton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Keeping it looking good
Looking after the surface is easy:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs straight away
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
What we can’t put right
A repair is not right for every job, for example:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Covering Starbotton
Starbotton is about 15 miles north of Skipton, in North Yorkshire. Customers in Starbotton get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. We work in all 626 towns and villages across North Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 33 miles away.
All of BD23 is covered, from the main roads to the quietest streets. From Coates Lane and Long Lane or anywhere nearby, we can come to you. If you’re just outside Starbotton, we cover Kettlewell (2 miles south-east), Arncliffe (2 miles south-west), Hawkswick (3 miles south), Hubberholme (3 miles north-west) and Kilnsey (4 miles south). Within a short drive, we also cover Skipton (15 miles south), Settle (11 miles south-west), Pateley Bridge (14 miles south-east), Grassington (7 miles south-east), Embsay (14 miles south) and Leyburn (14 miles north-east).
Near you in Starbotton
In Starbotton, that means homes near Fox And Hounds Public House and the streets around them.
About our accreditations · Every repair comes with a one-year guarantee.
