Wiltshire · England

Bath re-enamelling & resurfacing in Stockley, Wiltshire

Bath re-enamelling in Stockley without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Stockley

Prices and what affects them

Prices start from £350. You will not pay by the hour. The price depends on:

  • What the surface is made of
  • How many areas need work
  • How easy the damage is to reach
  • The colour and finish to match

The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.

How to get a fixed price

You can normally get a fixed price without us visiting. To make it quick:

  • A wider photo showing the entire bath
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • A clear, close picture of the problem area

Email us pictures of the damage and a wider shot of the whole item, with your SN11 postcode, and we will reply with a fixed price.

Bath re-enamelling in Stockley, done in place

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s an outdated colour you’d like to change and a bath that stays dull however much you clean it, we can help.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Area
Stockley (SN11)
Region
Wiltshire
Cover
A year, on every repair
Quotes
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

How to look after the repair

Good habits make a big difference to how long a repair lasts:

  • Don’t use the bath until it has fully cured
  • Avoid suction-cup mats
  • Use washing-up liquid and a soft cloth
  • Don’t leave a chip unrepaired

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

What happens on the day

Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Open a window if you can
  • Point us to the nearest place to park
  • Clear toiletries, mats and anything else from around the area

How to get a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

Send photos for a quote

Read more

Common problems we fix in Stockley

Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

Send us a picture if you notice any of these:

  • Enamel that’s lost its shine and feels rough
  • Brown or grey marks that don’t clean off
  • Chips and rust in more than one place
  • A coloured bath you want in white

What your quote should include

  • What aftercare is recommended
  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • Who turns up on the day

10 questions to ask before you book

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Stockley and the surrounding area

Stockley is about 2 miles south of Calne, in Wiltshire. Whether you are in the middle of Stockley or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Stockley is one of 425 places in Wiltshire where we work. Our jobs stretch from Stockley to Birmingham (about 74 miles away).

Our visits in SN11 work the same way as everywhere else we cover. Whether you live on Stockley Lane and Stockley Road or a nearby road, we can come to you. We also cover the places around Stockley: Quemerford (1 mile north), Theobald's Green (1 mile north-east), Cherhill (3 miles north-east), Compton Bassett (4 miles north-east) and Yatesbury (5 miles north-east). Further out, we also cover Trowbridge (11 miles south-west), Chippenham (6 miles north-west), Devizes (4 miles south), Westbury (13 miles south-west), Melksham (6 miles south-west) and Corsham (9 miles west).

What’s near Stockley

Locally, our jobs take us to homes close to Bentley's School, Heddington Church of England Primary School and The Ivy Public House. You will also find Church of St Andrew (0.9 miles south) and Kingsbury Green Academy (1.4 miles north). A little further out are Devizes Community Hospital (3.7 miles south) and Shane's Castle (3.7 miles south). The countryside around Stockley includes King's Play Hill.

Map of Stockley © OpenStreetMap contributors

Repairs by material

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Questions from Stockley

Can you re-enamel a roll-top bath?

Yes. Inside and out.

Is there any odour?

Expect a mild smell while we’re working.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Will the bath be moved?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

When a repair isn’t the answer

In fairness, there are a few things a repair won’t fix:

  • Leaking taps or wastes (a plumber’s job)
  • Problems we can’t see until an old finish comes off
  • A metal bath with a through crack

Send us photos and we will tell you honestly before booking.

Materials we work on in Stockley

  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.