Warwickshire · England
Bath re-enamelling & resurfacing in Stourton, Warwickshire
Problem with your bath in Stourton? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A peeling or bubbling previous coating
About our bath re-enamelling in Stourton
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We’re often asked to fix staining under the taps and around the waste and an old resurfacing that’s failing, in pressed steel baths, basins & shower trays and cast iron baths.
We stand behind the work with a one-year guarantee.
- Location
- Stourton (CV36, OX15)
- Area hub
- Warwickshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your pictures. What matters most is:
- The colour and finish to match
- Any earlier repairs that need removing first
- The material
- Access to the area
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- A coin or ruler next to the damage for scale
- Details of any past repairs
- Where you are, by postcode
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Towns and villages near Stourton
Other services in Stourton
What we’re called out for in Stourton
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
People typically call us after spotting one of these:
- A roll-top that is seen better days
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Comparing quotes
- Aftercare advice
- Whether the price is fixed and includes VAT
- How your room will be protected
- What the guarantee covers, and for how long
What we can’t put right
To be straight with you, some problems need a different fix:
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
- A bath split right through the body
Send us photos and we will tell you honestly.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Repair or replace in Stourton?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Stourton clients choose us
- CHAS and Constructionline accredited
- Most jobs done in one visit
- A fixed quote before booking
- A year’s guarantee on all work
Read our prices page and guide to resurfacing and replacement costs.
About Stourton
Stourton is about 10 miles west of Banbury, in Warwickshire. Jobs in Stourton are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Stourton is one of 324 towns and villages in Warwickshire where we work. We work right across the region, from Stourton to Birmingham (about 33 miles away).
We work across CV36 and OX15 and the streets around it. You’ll find streets such as Featherbed Lane and St John's Close, all of which we cover. Close by, we cover Cherington (1 mile south-east), Sutton-under-Brailes (1 mile north-east), Whichford (2 miles south-east), Lower Brailes (2 miles north-east) and Upper Brailes (2 miles north-east). Further out, we also cover Stratford-upon-Avon (13 miles north-west), Shipston-on-Stour (3 miles north-west), Wellesbourne (11 miles north), Middle Quinton (10 miles north-west), Bidford-on-Avon (15 miles north-west) and Meon Vale (10 miles north-west).
Near you in Stourton
We visit homes around Cherington Arms Public House and Church of St John the Baptist. A little further out are Wheelbarrow Castle (3.9 miles south) and Ellen Badger Hospital (3.1 miles north-west). Green spaces nearby include Castle Hill and Woodford Bottom and Lamb's Pool.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Stourton questions
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take the best part of a day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
