Warwickshire · England

Bath re-enamelling & resurfacing in Whichford, Warwickshire

Our repair technicians come to Whichford for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Whichford

About our bath re-enamelling in Whichford

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you’re dealing with several chips and rust patches and a bath that stays dull however much you clean it, we can generally put it right, on cast iron baths, acrylic baths and basins & shower trays alike.

All of our repairs are guaranteed for twelve months in Whichford and everywhere else. We return to put right any problem with the work.

Where
Whichford (CV36)
County
Warwickshire
Warranty
12 months on all our work
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How we price bath re-enamelling

Prices start from £350. There are no hourly rates or hidden extras. The price depends on:

  • The type of damage
  • The material
  • Any earlier repairs that need removing first
  • The size and number of damaged areas

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

A couple of clear pictures is all it takes. It helps if you send:

  • A coin or ruler next to the damage for scale
  • Any earlier repairs or coatings
  • The material, if you know it
  • Natural light rather than flash

If you are in Whichford and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

When we would advise against a repair

To be straight with you, some problems need a different fix:

  • Plumbing leaks, which need a plumber
  • Holes rusted through the metal
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops

What happens on the day

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the following day, the bath is ready.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area

Get a quote

Send us a picture of the damage and a wider shot of the entire item, with your CV36 postcode, and we will reply with a fixed quote.

Send photos for a quote

Advice

Repairing versus replacing in Whichford

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

What you get with us

  • We come to you, anywhere in the UK
  • Dust sheets down, tidy finish
  • Accredited with CHAS, Constructionline and SafeContractor
  • Straight answers about what a repair can do

See our prices page or resurfacing vs replacement cost guide.

Covering Whichford

Whichford is about 9 miles south-west of Banbury, in Warwickshire. Anywhere in CV36, a technician comes to you. Whichford is one of 324 places in Warwickshire we cover. We work right across the region, from Whichford to Birmingham (35 miles away).

We cover every part of the CV36 postcode area. From Barrats Hill, Ascott Road and De Mohun Crescent or anywhere nearby, we can come to you. If you are just outside Whichford, we cover Ascott (1 mile east), Cherington (2 miles north-west), Sutton-under-Brailes (2 miles north-west), Stourton (2 miles north-west) and Lower Brailes (3 miles north). Further out, we also cover Stratford-upon-Avon (15 miles north-west), Shipston-on-Stour (5 miles north-west), Wellesbourne (13 miles north), Middle Quinton (12 miles north-west), Meon Vale (12 miles north-west) and Lighthorne Heath (13 miles north).

Near you in Whichford

Typical jobs here are in homes near Church of St Michael and the streets around them. Nearby you will also find Wheelbarrow Castle (3.7 miles south-west) and Ellen Badger Hospital (5.1 miles north-west). The countryside around Whichford includes Woodford Bottom and Lamb's Pool and Castle Hill.

Map of Whichford © OpenStreetMap contributors

FAQs for Whichford

Is there any odour?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Can you fix a peeling bath coating?

Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Can you make a coloured bath white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

What areas do you cover?

Everywhere in the UK, Whichford included. There is no extra charge for travel.

Is repairing better than replacing?

Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

DIY repairs versus a professional job

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Signs you need bath re-enamelling in Whichford

Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.

People typically call us when they notice something like this:

  • Thin, worn enamel in places
  • Enamel that’s lost its shine and feels rough
  • A period or roll-top bath worth keeping
  • A coating lifting around the plughole

What to look for in a quote

  • How long it needs to cure
  • What prep work is covered
  • Who will actually do the work
  • How long the guarantee is and what it covers

How to compare quotes

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Avoid suction-cup mats
  • Do not leave bottles, razors or sponges standing on the surface
  • Do not let dyes or oils sit on the finish
  • Don’t use the bath until it has fully cured

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.