Argyll and Bute · Scotland
Bath Re-enamelling for Strachur homes
Damaged bath in Strachur? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About our bath re-enamelling in Strachur
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. If you are dealing with a coloured bath you want in white and a period or roll-top bath worth keeping, we can typically put it right, whatever the material.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Strachur (PA27)
- County
- Argyll and Bute
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a full day for most jobs. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Related advice
Aftercare tips
Most damage we see is avoidable. A few tips:
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
Use mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Do you need bath re-enamelling in Strachur?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Common reasons people in Strachur contact us are:
- Stains that won’t shift
- Wear marks under the taps
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
What your quote should include
- What preparation is included
- Who will actually do the work
- What happens if they find more damage
- How soon you can use it again
About Strachur
Strachur is about 17 miles north-west of Helensburgh, in Argyll and Bute. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Strachur is one of 118 places in Argyll and Bute we cover. Our jobs stretch from Strachur to Glasgow (about 37 miles away).
All of PA27 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Montgomery Place, Manse Gardens and Forest View. Close by, we cover Inbhir Aora (4 miles north), Inveraray (4 miles north), Lochgoilhead (6 miles east), Cairndow (8 miles north-east) and Minard (8 miles south-west). Within a short drive, we also cover Rhu (15 miles south-east), Garelochhead (11 miles south-east) and Sandbank (14 miles south). For island and remote addresses, call first so we can plan the visit.
Around Strachur
Our customers here include homes close to Kilmaglash Parish Church and Sculptured Stones, among other places. Nearby you’ll also find Strachur Smiddy Museum (under half a mile north-west).
What affects the price in Strachur
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- How many items we do on one visit
- Access to the area
- What the surface is made of
- How hard the colour is to match
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Phone photos are fine. Ensure they show:
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- The material, if you know it
- A wider photo showing the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Towns and villages near Strachur
What else we do in Strachur
Repairing versus replacing in Strachur
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Strachur
- Everything repaired in place
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- One price list for the entire UK
Take a look at our prices page and resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Strachur
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Do you work in Strachur?
We do. Repair technicians travel to Strachur from across the region, with no extra charge for travel.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Work for landlords and builders
Landlords, letting agents and housing providers in Strachur use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams in Argyll and Bute and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
