Kent · England
Bath re-enamelling & resurfacing in Street End, Kent
Our repair technicians come to Street End for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Covering Street End
Street End is about 2 miles south of Canterbury, in Kent. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 922 places in Kent, from the larger towns to small villages. Our jobs stretch from Street End to London (54 miles away).
Here we cover the CT4 postcode area. You will find streets such as White Hill Close, Bridge Road and Faussett Hill, and we cover them all. Close by, we cover Nackington (1 mile north-east), Lower Hardres (1 mile south), Stuppington (1 mile north-west), Pett Bottom (1 mile south-east) and Upper Hardres (2 miles south). Larger places within reach include Ashford (12 miles south-west), Dover (12 miles south-east), Folkestone (12 miles south), Whitstable (8 miles north), Deal (14 miles east) and Faversham (10 miles north-west).
Near you in Street End
Typical jobs here are in homes near Simon Langton Grammar School for Boys and Church of St Mary, among other places. For rail, the closest station is Canterbury East station, roughly 2.1 miles north of the centre. A little further out are Rupert Bear Museum (2.3 miles north) and Kent and Canterbury Hospital (1.5 miles north). Not far away are Blean Woods RSPB Reserve.
How we handle bath re-enamelling in Street End
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a peeling or bubbling previous coating and chips and rust in more than one place, in acrylic baths, basins & shower trays and Victorian roll-tops.
We stand behind the work with a one-year guarantee.
- Where
- Street End (CT4)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Street End
How much does bath re-enamelling cost in Street End?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Will the price change on the day?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
When a repair isn’t the answer
A repair isn’t right for every job, including:
- A bath split right through the body
- A bath that is rusted through
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
What affects the price in Street End
Resurfacing from £350. We price every job individually, from your photos. What matters most is:
- How many areas need work
- Access to the area
- Doing more than one item at once
- What kind of damage it is
Our prices are the same across the UK, so there is no premium for Street End. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- A clear, close picture of the problem area
- Any details about the material
- Natural light rather than flash
- Whether it’s been repaired or coated before
Upload a photo of the damage and a wider shot of the entire item, with your CT4 postcode, and we’ll reply with a fixed quote.
Also near Street End
What else we do in Street End
Repair or replace in Street End?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Colour-matched on site
- One-year guarantee on every repair
- Nothing taken out or refitted
- No extra charge for your area
See our prices page or resurfacing vs replacement cost guide.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The process
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day in most cases. The room is left tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
Most clients in Street End get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
