Gloucestershire · England
Bath re-enamelling & resurfacing in Moorslade, Gloucestershire
Full bath re-enamelling and resurfacing in Moorslade, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Bath re-enamelling in Moorslade, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for lots of chips and rust spots and an original cast iron bath that needs restoring, across pressed steel baths, cast iron baths and basins & shower trays.
All our work comes with a one-year guarantee.
- Area
- Moorslade (GL13)
- Region
- Gloucestershire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
Get a quote
If you are in Moorslade and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- No extra charge for your area
- Normally one visit, start to finish
- Colour-matched on site
- Honest advice, even when it means no job
Read our pricing and resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The material
- How much damage there is
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- The material, if you know it
- Something in shot to show the size
- One sharp close-up of the damage
- A wider photo showing the whole bath
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Do you need bath re-enamelling in Moorslade?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- A coating lifting around the plughole
- Stains that will not shift
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Questions to ask before booking
- How the room is protected while they work
- How long the guarantee is and what it covers
- Whether there are any call-out or travel charges
- What prep work is covered
Aftercare tips
To keep it looking its best for years:
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Store bottles off the bath
- Have chips seen to early
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Landlords, agents and businesses in Moorslade
If you manage property in Moorslade, we will quote for several properties at once. Send pictures for each one and we will price them together.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Moorslade and nearby
Moorslade is about 3 miles north-east of Thornbury, in Gloucestershire. We travel to homes and businesses in Moorslade and nearby villages, so nothing has to leave your home. Our repair technicians cover all 470 towns and villages in Gloucestershire. You can also see our page for Birmingham, about 62 miles away.
Here we cover the GL13 postcode area. We also cover the places around Moorslade: Lower Stone (1 mile north-west), Falfield (1 mile south-east), Sundayshill (1 mile south-west), Stone (1 mile north-east) and Woodford (2 miles north-east). Within a short drive, we also cover Stroud (12 miles north-east), Quedgeley (15 miles north-east), Lydney (6 miles north-west), Kingsway Village (15 miles north-east), Cam (6 miles north-east) and Stonehouse (11 miles north-east).
Around Moorslade
Our clients here include homes close to Stone with Woodford Church of England Primary School and Church of St George. Further afield, we also cover the area around Vale Community Hospital (5.7 miles north-east) and Thornbury and District Museum (3.7 miles south-west).
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Your questions about bath re-enamelling in Moorslade
How do I get a price for bath re-enamelling in Moorslade?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item with your GL13 postcode.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
How long does re-enamelling take?
Normally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Also near Moorslade
What else we do in Moorslade
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
