Oxfordshire · England
Bath re-enamelling & resurfacing in Sunnymead, Oxfordshire
We travel to Sunnymead for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Sunnymead and the surrounding area
Sunnymead is about 3 miles north-west of Oxford, in Oxfordshire. From the centre of Sunnymead to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 443 towns and villages in Oxfordshire, from the larger towns to small villages. You can also see our page for London, about 54 miles away.
All of OX2 is covered, from the main roads to the quietest streets. From Wren Road, Scott Road and Wyatt Road or a nearby road, a technician can come to you. Sunnymead sits on or near the A4165, which makes travel easy. We also travel to Cutteslowe (1 mile north), Summertown (1 mile south), North Oxford (1 mile south), Wolvercote (1 mile west) and Park Town (1 mile south). Within a short drive, we also cover Oxford (3 miles south-east), Didcot (12 miles south), Bicester (9 miles north-east), Abingdon-on-Thames (7 miles south), Witney (10 miles west) and Carterton (14 miles west).
Around Sunnymead
Our customers here include homes close to Dew Drop Inn, Roman Catholic Church of St Gregory and St Augustine and Summer Fields School and the streets around them. You’ll also find Oxford University Parks (1.7 miles south), Oxford Academy (0.7 miles south), St Hugh's College Main Building Including Library (1.2 miles south) and Cutteslowe Primary School (less than half a mile north-east). The nearest railway station is Oxford Parkway station, roughly 1.4 miles north. Nearby you will also find Oxford Castle (2.3 miles south) and Oxford University Museum of Natural History (1.8 miles south). The countryside around Sunnymead includes Hook Meadow and The Trap Grounds and Headington Hill.
About our bath re-enamelling in Sunnymead
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you are dealing with a bath in a colour that no longer suits and a dull, rough surface that won’t come clean, we can usually put it right, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Sunnymead (OX2)
- Area hub
- Oxfordshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Sunnymead questions
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Do you work in Sunnymead?
Yes. We work across the UK and come to Sunnymead. Send photos and we will quote, or call 0345 017 0787.
Which areas do you work in?
Everywhere in the UK, Sunnymead included. There is no extra charge for travel.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Landlord and trade work in Sunnymead
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Towns and villages near Sunnymead
Also in Sunnymead
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Store bottles off the bath
- Do not let dyes or oils sit on the finish
- Do not leave a chip unrepaired
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
- Make sure the area is dry
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- What the surface is made of
- The colour and finish to match
- How much damage there is
- Access to the area
The price reflects the work involved, not where you live. You’ll see the full price before you book.
How to get a fixed quote
You can generally get a fixed price without us visiting. To help us price it:
- One picture of the whole bath
- Where you are, by postcode
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
What a repair can’t fix
Some jobs are not right for a repair, for example:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Sunnymead
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Do you need bath re-enamelling in Sunnymead?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Get in touch if you’ve noticed any of these:
- Wear marks under the taps
- A roll-top that is seen better days
- Brown or grey marks that do not clean off
- A dull, rough surface that won’t come clean
Comparing quotes
- Whether a trained technician does the job
- If travel is included in the price
- How long it needs to cure
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
