Oxfordshire · England
Bath re-enamelling & resurfacing in Park Town, Oxfordshire
We travel to Park Town for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that will not shift
- A dull, rough surface that won’t come clean
About our bath re-enamelling in Park Town
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for a bath in a colour that no longer suits and staining under the taps and around the waste, across basins & shower trays, Victorian roll-tops and pressed steel baths.
Big or small, it’s backed by a one-year guarantee.
- Where
- Park Town (OX2, OX1)
- County
- Oxfordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Nearby places to Park Town
More services for Park Town
Repair or replace: which is better?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- No need to remove anything
- Normally one visit, start to finish
- One-year guarantee on every repair
- Fixed prices from your pictures
See our full price list and bath cost comparison.
How it works
We work cleanly and quietly. We protect the area first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to look after it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
Getting a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Park Town: your questions answered
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
What areas do you cover?
We work UK-wide, so Park Town is covered. Our prices are the same everywhere.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
What happens next?
You’ll get a fixed quote back, typically with dates to choose from. There is no obligation to book.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Common problems we fix in Park Town
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
Keep an eye out for any of the following:
- A coating lifting around the plughole
- A coloured bath you want in white
- Thin, worn enamel in places
- Chips and rust in more than one place
What your quote should include
- Whether they match the colour on site
- Aftercare advice
- Who turns up on the day
- If travel is included in the price
Our work in Park Town
Park Town is about 2 miles north-west of Oxford, in Oxfordshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Park Town is one of 443 towns and villages in Oxfordshire where we work. We work right across the region, from Park Town to London (53 miles away).
Our visits in OX2 and OX1 work the same way as everywhere else we cover. You will find streets such as Parks Road, Keble Road and Crick Road, all of which we cover. Main roads around Park Town include the A4144, so getting to you is simple. Other places close to Park Town include Norham Manor (1 mile east), Walton Manor (1 mile south-west), Jericho (1 mile south-west), North Oxford (1 mile north) and St John Street area (1 mile south). We also work in nearby towns such as Didcot (11 miles south), Bicester (10 miles north-east), Abingdon-on-Thames (6 miles south), Witney (10 miles west), Carterton (14 miles west) and Thame (12 miles east).
Local landmarks in Park Town
Typical jobs here are in homes near St Aloysius' Catholic Primary School, St Hugh's College Main Building Including Library and Oxford Centre for Mission Studies and the streets around them. Other local landmarks include Oxford Academy (0.6 miles north), Wychwood School (under half a mile north), Oxford University Parks (less than half a mile south-east) and The Rose & Crown pub (within half a mile south). For rail, the closest station is Oxford station, roughly 0.9 miles south-west of the centre. Other landmarks nearby include Oxford Castle (1 mile south) and Oxford University Museum of Natural History (0.5 miles south). Not far away are Headington Hill and Hook Meadow and The Trap Grounds.
Aftercare tips
How the surface is treated afterwards matters:
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams in Oxfordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Park Town. The price reflects:
- How many items we do on one visit
- What kind of damage it is
- The material and finish
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for Park Town. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- A clear, close picture of the problem area
- Any details about the material
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
