Lancashire · England
Bath Re-enamelling for Blackleach homes
Full bath re-enamelling and resurfacing for homes and businesses in Blackleach and across Lancashire. Free, fixed quotes from your photos.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that will not shift
How we handle bath re-enamelling in Blackleach
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Typical jobs include a bath that stays dull however much you clean it and staining under the taps and around the waste, on Victorian roll-tops, basins & shower trays and pressed steel baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Blackleach (PR4)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Nearby places to Blackleach
More services for Blackleach
Common problems we fix in Blackleach
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
Before booking anyone
- What aftercare is recommended
- The length of the guarantee and what it covers
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Common questions in Blackleach
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
How do I get a price for bath re-enamelling in Blackleach?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Colour mixed on the day to match
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Usually one visit, start to finish
Read our prices page or bath cost comparison.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a full day, tidy-up included.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
What a repair cannot fix
Some jobs aren’t right for a repair, including:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Landlords, agents and businesses in Blackleach
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Blackleach and nearby
Blackleach is about 3 miles north-west of Fulwood, in Lancashire. Across the PR4 area, we carry out the work at your property. Blackleach is one of 482 places in Lancashire we cover. We work right across the region, from Blackleach to Liverpool (28 miles away).
Every address in PR4 is covered, from the main roads to the quietest streets. You’ll find streets such as Roots Lane and Blackleach Lane, and we cover them all. We also travel to Swillbrook (1 mile east), Catforth (1 mile north), Black Pole (1 mile north-east), Woodsfold (1 mile north) and Lewth (1 mile north). Larger places within reach include Preston (5 miles south-east), Chorley (13 miles south-east), Lytham St Anne's (9 miles south-west), Bamber Bridge (7 miles south-east), Leyland (9 miles south-east) and Fulwood (3 miles south-east).
Local landmarks in Blackleach
We visit homes around The Bay Horse pub and Catforth Primary School and the streets around them. The closest station to Blackleach is Salwick station, roughly 1.8 miles south-west. Further afield, we also cover the area around Royal Preston Hospital (3.6 miles east) and Church Cottage (3.2 miles east).
How we price bath re-enamelling
Resurfacing from £350. You will not pay by the hour. The price depends on:
- The colour and finish to match
- Where the damage is and how we get to it
- How much damage there is
- Whether we combine several jobs
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
You can take the pictures on your phone. Just ensure we can see:
- One sharp close-up of the damage
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- Details of any past repairs
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say right away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
