West Lothian · Scotland
Bath Re-enamelling for Tarbrax homes
Bath re-enamelling across Tarbrax and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Common questions in Tarbrax
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Do you come to Tarbrax?
We do. We send a technician to Tarbrax for every job, and the price is the same as everywhere else.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What areas do you cover?
We cover the entire UK, including Tarbrax and the rest of West Lothian. Just include your postcode and we’ll offer you dates.
About our bath re-enamelling in Tarbrax
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Our repair technicians work on pressed steel baths, Victorian roll-tops and acrylic baths, and the jobs we see most are a coating lifting around the plughole and chips and rust in more than one place.
All our work is covered by a one-year guarantee.
- Location
- Tarbrax (EH55)
- Region
- West Lothian
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep pets and children out of the room while we work
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- How hard the colour is to match
- The material and finish
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- Any details about the material
- A picture taken from further back
- Daylight if possible, and no flash reflection
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Landlords, agents and businesses in Tarbrax
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Tarbrax and nearby
Tarbrax is about 8 miles south of Livingston, in West Lothian. We visit clients in Tarbrax and the surrounding area, so you don’t need to take anything anywhere. Tarbrax is one of 58 towns and villages in West Lothian where we work. Our nearest city page is Edinburgh, about 18 miles away.
Every address in EH55 is covered. Jobs here include addresses on Crosswood Terrace, Viewfield Road and Tarbrax Road and the roads around them. We also cover the places around Tarbrax: Auchengray (2 miles west), Haywood (4 miles west), Wilsontown (5 miles west), West Calder (5 miles north) and Addiebrownhill (5 miles north-west). Further out, we also cover Livingston (8 miles north), Bathgate (9 miles north), Linlithgow (14 miles north), Whitburn (8 miles north-west), East Calder (9 miles north-east) and Broxburn (11 miles north).
What’s near Tarbrax
In Tarbrax, that means homes near Tarbrax Church. Tarbrax’s nearest station is Addiewell station, about 4.8 miles north-west of the centre. For a walk, there’s Maiden Hill.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking.
Why Tarbrax customers choose us
- One-year guarantee on every repair
- No need to remove anything
- Colour mixed on the day to match
- No extra charge for your area
Take a look at our full price list or resurfacing vs replacement cost guide.
Nearby places to Tarbrax
What else we do in Tarbrax
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Store bottles off the bath
- A dripping tap should be fixed promptly
- Have chips seen to early
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we will say what we think.
Materials we work on in Tarbrax
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Common problems we fix in Tarbrax
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
You may need us if you’ve spotted any of these:
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Comparing quotes
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
- How the colour is matched
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
