South Lanarkshire · Scotland
Bath Re-enamelling in Auchengray
Our repair technicians come to Auchengray for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Several chips and rust patches
About our bath re-enamelling in Auchengray
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s staining under the taps and around the waste and lots of chips and rust spots, we can help, whatever the material.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Auchengray (ML11)
- County
- South Lanarkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Auchengray
Auchengray is about 9 miles south of Bathgate, in South Lanarkshire. Whether you are in the middle of Auchengray or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Auchengray is one of 139 towns and villages in South Lanarkshire where we work. Our jobs stretch from Auchengray to Edinburgh (about 20 miles away).
All of ML11 is within our area. Close by, we cover Haywood (2 miles west), Tarbrax (2 miles east), Wilsontown (3 miles west), Braehead (3 miles south-west) and Forth (3 miles west). We also work in nearby towns such as Larkhall (14 miles west), Carluke (9 miles west), Lanark (9 miles south-west), Lesmahagow (14 miles south-west), Law (11 miles west) and Biggar (10 miles south).
Near you in Auchengray
Typical jobs here are in homes near The Auchengray Inn and Auchengray Church, among other places. For rail, the closest station is Breich station, roughly 4.7 miles north-west. Well-known places in the area include Couthally Castle (4 miles south). For a walk, there’s Lingy Knowe.
Do you need bath re-enamelling in Auchengray?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed any of these:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Questions to ask before you book
- Who turns up on the day
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- How soon you can use it again
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Questions from Auchengray
Is there a guarantee?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
How much does bath re-enamelling cost in Auchengray?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you work in Auchengray?
Yes, we do. We send a technician to Auchengray for every job, and the price is the same as everywhere else.
What affects the price in Auchengray
Prices start from £350. There is no area surcharge for Auchengray. The price reflects:
- Previous DIY repairs that have to come out
- Access to the area
- What the surface is made of
- The size and number of damaged areas
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- A close-up of the damage, in focus
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Related advice
Honest limits
A few problems are outside what a surface repair can do:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Also in Auchengray
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Aftercare tips
It’s all simple stuff:
- Store bottles off the bath
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
