West Lothian · Scotland
Bath re-enamelling & resurfacing in West Calder, West Lothian
Bath re-enamelling in West Calder without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that is failing
How we handle bath re-enamelling in West Calder
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include worn patches where water runs and sits and an outdated colour you’d like to change, across acrylic baths, basins & shower trays and Victorian roll-tops.
You get a one-year guarantee, the same in West Calder as everywhere else we work.
- Where
- West Calder (EH55)
- County
- West Lothian
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from West Calder
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
How long will the bath be out of use?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Nearby places to West Calder
Other services in West Calder
Where we work around West Calder
West Calder is about 4 miles south-west of Livingston, in West Lothian. We visit homes and businesses in West Calder and nearby villages, so you don’t need to take anything anywhere. West Calder is one of 58 towns and villages in West Lothian where we work. Our nearest city page is Edinburgh, about 16 miles away.
We cover every part of the EH55 postcode area. Streets in the area include King Square, Main Street and Station Road. Other places close to West Calder include Mossend (1 mile north), Polbeth (1 mile north-east), Seafield (2 miles north), Bellsquarry (2 miles north-east) and Adambrae (2 miles north-east). We also work in nearby towns such as Livingston (4 miles north-east), Bathgate (4 miles north-west), Linlithgow (9 miles north), Whitburn (5 miles west), East Calder (6 miles north-east) and Broxburn (7 miles north-east).
Near you in West Calder
Typical jobs here are in homes near West Calder, among other places. West Calder has its own railway station: West Calder station. A little further out are Almond Valley Heritage Centre (2.6 miles north) and Livingston Designer Outlet (3 miles north-east). Open spaces near West Calder include Dechmont Law.
When we would advise against a repair
Some jobs aren’t right for a repair, for example:
- A bath that is rusted through
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether we combine several jobs
- The material
We charge the same wherever you are, with no extra for West Calder. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
When you take your pictures, a few simple things make all the difference:
- Details of any past repairs
- Any details about the material
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Landlord and trade work in West Calder
If you manage property in West Calder, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Signs you need bath re-enamelling in West Calder
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
If you can see any of these, send us a picture:
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
- A coloured bath you want in white
- Chips and rust in more than one place
Comparing quotes
- Who will actually do the work
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- What happens if they find more damage
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Respect the curing time we give you
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why us?
- Honest advice, even when it means no job
- Fixed prices from your pictures
- One price list for the entire UK
- Repair technicians who travel to you, UK-wide
Take a look at our full price list or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
