Argyll and Bute · Scotland
Bath Re-enamelling for Taynuilt homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Taynuilt. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that will not shift
- A bath that stays dull however much you clean it
Covering Taynuilt
Taynuilt is about 35 miles north-west of Helensburgh, in Argyll and Bute. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We cover all 118 towns and villages in Argyll and Bute. Our nearest city page is Glasgow, about 54 miles away.
Jobs in PA35 work the same way as everywhere else we cover. We regularly work on streets such as Achnafearna, Aldersyde and Nant Park and the roads around them. Taynuilt is on the B845, which makes it straightforward to reach. We also cover the places around Taynuilt: Black Crofts (6 miles north-west), Ardchattan (6 miles north-west), Connel (6 miles west), North Connel (6 miles west) and Barcaldine (7 miles north-west). Further out, we also cover Oban (9 miles west), Dunollie (9 miles west), Dunbeg (8 miles west), Inbhir Aora (15 miles south-east) and Inveraray (15 miles south-east). Some remote addresses need extra planning, so it’s best to call first.
Around Taynuilt
In Taynuilt, that means homes near Kilespikeral Old Parish Church and the streets around them. Taynuilt has its own railway station: Taynuilt station. Well-known places in the area include Loch Tromlee (4.6 miles south-east). Not far away are Loch Tromlee.
Bath re-enamelling in Taynuilt, done in place
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s an outdated colour you’d like to change and enamel that’s lost its shine and feels rough, we can help, whatever the material.
All our work comes with our one-year guarantee, wherever you are in Argyll and Bute.
- Where
- Taynuilt (PA35)
- Region
- Argyll and Bute
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Taynuilt
Honest limits
A repair is not right for every job, for example:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
What we’re called out for in Taynuilt
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for any of the following:
- An outdated colour you’d like to change
- Several chips and rust patches
- A roll-top that’s seen better days
- An old resurfacing that is failing
What to look for in a quote
- If travel is included in the price
- How to look after the finish
- What happens if they find more damage
- The length of the guarantee and what it covers
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Taynuilt. The price reflects:
- How hard the colour is to match
- What the surface is made of
- Previous DIY repairs that have to come out
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- Any details about the material
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Should you replace it?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- No need to remove anything
- Fixed prices from your pictures
- Accredited with CHAS, Constructionline and SafeContractor
- Usually one visit, start to finish
Read our prices page or bath cost comparison.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes most of the day. We clean up when we’re done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs right away
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Common questions in Taynuilt
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
