Kent · England
Bath Re-enamelling for The Brents homes
Full bath re-enamelling and resurfacing for homes and businesses in The Brents and across Kent. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
The Brents questions
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How much does bath re-enamelling cost in The Brents?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your ME13 postcode.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do you come to The Brents?
Yes. We work across the UK and travel to The Brents. Send photos and we’ll quote, or call 0345 017 0787.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Bath re-enamelling in The Brents without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for brown or grey marks that don’t clean off and thin, worn enamel in places, on cast iron baths, pressed steel baths and acrylic baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- The Brents (ME13)
- County
- Kent
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
- Do not leave a chip unrepaired
- Do not use the bath until it has fully cured
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the entire surface without moving it. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why book with us
- One-year guarantee on every repair
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Work done at your home or business
Take a look at our full price list and bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- The material and finish
- How hard the colour is to match
- How many items we do on one visit
- Any earlier repairs that need removing first
The price reflects the work involved, not where you live. The full price is agreed before you book.
Quotes from your pictures
We price nearly every job from pictures. This is what to send:
- A wider photo showing the whole bath
- What it’s made of, if you know
- Where you are, by postcode
- Details of any past repairs
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and you are under no obligation.
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Other services in The Brents
The Brents and nearby
The Brents is about 1 mile north-east of Faversham, in Kent. Whether you’re in the middle of The Brents or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. The Brents is one of 922 towns and villages in Kent where we work. Our jobs stretch from The Brents to London (about 44 miles away).
Our repair technicians cover all of the ME13 postcode area. You will find streets such as Ham Road, Back Lane and Quay Lane. Close by, we cover Davington (1 mile west), Faversham (1 mile south-west), Preston (1 mile south), Oare (1 mile north-west) and Ospringe (1 mile south-west). Larger places within reach include Ashford (12 miles south), Canterbury (9 miles east), Sittingbourne (7 miles west), Whitstable (6 miles east), Herne Bay (11 miles east) and Minster (8 miles north-west).
What’s near The Brents
We visit homes around Queen Elizabeth's Grammar School, Oare Meadow and Faversham Parish Church and the streets around them. Other local landmarks include The Brents Tavern (less than half a mile north-west) and Davington Primary School (within half a mile west). The nearest railway station is Faversham station, about 0.6 miles south. Further afield, we also cover the area around Newnham Castle (4.6 miles south-west).
What happens on the day
We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know about parking or access
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Get a quote
For a price in The Brents, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What we are called out for in The Brents
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Contact us if you’ve noticed any of these:
- A coating lifting around the plughole
- Wear marks under the taps
- Chips and rust in more than one place
- A coloured bath you want in white
Before you book anyone
- How changes to the job are handled
- The length of the guarantee and what it covers
- When it can be used again
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
