East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Thorngumbald, East Riding of Yorkshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Thorngumbald. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
Bath re-enamelling at your home in Thorngumbald
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with thin, worn enamel in places and a period or roll-top bath worth keeping, we can help, whatever the material.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Thorngumbald (HU12)
- County
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Thorngumbald
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up and a picture of the entire item with your HU12 postcode.
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you come to Thorngumbald?
Yes. We cover the whole UK and come to Thorngumbald. Send us photos for a fixed quote, or call 0345 017 0787.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across East Riding of Yorkshire.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in East Riding of Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About Thorngumbald
Thorngumbald is about 7 miles east of Kingston upon Hull, in East Riding of Yorkshire. We visit clients in Thorngumbald and the surrounding area, so you don’t need to take anything anywhere. Thorngumbald is one of 299 towns and villages in East Riding of Yorkshire where we work. Our jobs stretch from Thorngumbald to Leeds (57 miles away).
Jobs in HU12 work the same way as everywhere else we cover. Local streets include St Mary's Drive, Elm Tree Close and Elm Tree Avenue. With the A1033 close by, Thorngumbald is simple for us to get to. If you’re just outside Thorngumbald, we cover Camerton (1 mile east), Ryehill (1 mile east), Hedon (2 miles north-west), Burstwick (2 miles north-east) and Keyingham (3 miles east). Further out, we also cover Beverley (13 miles north-west), Hessle (11 miles west), Cottingham (11 miles west), Hornsea (13 miles north), Anlaby (11 miles west) and Willerby (11 miles west).
What’s near Thorngumbald
In Thorngumbald, that means homes near Thorngumbald Primary School, New Royal Mail pub and Church of St Mary, among other places. Well-known places in the area include Hedon Museum (1.7 miles north-west) and Burstwick Castle (1.9 miles north-east).
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Where the damage is and how we get to it
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Two or three clear pictures are typically enough. Try to include:
- The material, if you know it
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
The quickest way to a price is to send two or three photos using our quote form or call us. We will say right away if a repair is the right fix.
Also in Thorngumbald
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Ensure the area is dry
- Tell us about any previous repairs or coatings
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Thorngumbald customers choose us
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- A fixed quote before you book
- We’ll tell you if it’s not worth repairing
See our full price list and bath cost comparison.
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
