East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Camerton, East Riding of Yorkshire
Bath re-enamelling for Camerton, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Camerton
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you’re dealing with enamel that’s lost its shine and feels rough and an old resurfacing that’s failing, we can help, whatever the material.
A one-year guarantee comes as standard.
- Where
- Camerton (HU12)
- County
- East Riding of Yorkshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes most of the day in most cases. We leave the room clean.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you are under no obligation.
Read more
Also near Camerton
Also in Camerton
Camerton and the surrounding area
Camerton is about 8 miles east of Kingston upon Hull, in East Riding of Yorkshire. Wherever you are in the HU12 postcode area, we come to you. Camerton is one of 299 towns and villages in East Riding of Yorkshire we cover. Our jobs stretch from Camerton to Leeds (58 miles away).
Here we cover the HU12 postcode area. From Station Road and Main Road or a nearby road, we can come to you. If you are just outside Camerton, we cover Ryehill (1 mile south), Burstwick (1 mile north-east), Thorngumbald (1 mile west), Keyingham (2 miles south-east) and Hedon (2 miles north-west). Within a short drive, we also cover Beverley (14 miles north-west), Hessle (12 miles west), Cottingham (12 miles west), Hornsea (13 miles north), Anlaby (12 miles west) and Willerby (12 miles west).
Landmarks near Camerton
Locally, our jobs take us to homes close to Burstwick Community Primary School, The Crooked Billet pub and All Saints' Church and the streets around them. Further afield, we also cover the area around Burstwick Castle (1.5 miles north) and Hedon Museum (2.4 miles north-west).
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs immediately
- Have chips seen to early
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Work for landlords and builders
Landlords, letting agents and housing providers in Camerton use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How much damage there is
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- The colour and finish to match
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Where you are, by postcode
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Honest limits
Some jobs aren’t right for a repair, for example:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that’s cracked right through
- A bath that is rusted through
Send us pictures and we will tell you honestly before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Camerton clients choose us
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
- Colour mixed on the day to match
See our pricing or resurfacing vs replacement cost guide.
Camerton: your questions answered
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you come to Camerton?
Yes. We work across the UK and travel to Camerton and the rest of East Riding of Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our accreditations · Every repair comes with a one-year guarantee.
