Lancashire · England
Bath re-enamelling & resurfacing in Thorpe Green, Lancashire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Thorpe Green. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Chips and rust in more than one place
- A coating lifting around the plughole
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling in Thorpe Green, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough, we can typically put it right, whatever the material.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Thorpe Green (PR6)
- County
- Lancashire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
How to get a price
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Thorpe Green, and we will come back with a fixed quote.
Advice
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Do not use the bath until it has fully cured
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Places near Thorpe Green
Also in Thorpe Green
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Thorpe Green. What changes the price is:
- The material and finish
- Any earlier repairs that need removing first
- How many items we do on one visit
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Thorpe Green and the surrounding area
Thorpe Green is about 2 miles south-east of Bamber Bridge, in Lancashire. Jobs in Thorpe Green are booked in like any other job: a fixed price from your photos, then a visit to do the work. We cover 482 places in Lancashire. Our jobs stretch from Thorpe Green to Manchester (23 miles away).
We work across PR6. Neighbouring places we cover include Top o' th' Lane (1 mile south-east), Pippin Street (1 mile north), Clayton Brook (1 mile west), Brindle (1 mile north-east) and Jack Green (1 mile north-east). Further out, we also cover Preston (5 miles north-west), Chorley (4 miles south), Accrington (11 miles east), Leyland (3 miles west), Fulwood (7 miles north-west) and Rawtenstall (14 miles east).
Landmarks near Thorpe Green
We visit homes around Brownedge St Mary's Catholic High School, Clayton Brook Community Church and Lord Nelson Inn. The nearest railway station is Bamber Bridge station, about 2 miles north-west of the centre. Further afield, we also cover the area around South Ribble Museum (2.3 miles north) and Chorley and South Ribble District General Hospital (3 miles south). Green spaces nearby include Healey Nab and Brockholes.
Do you need bath re-enamelling in Thorpe Green?
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- Lots of chips and rust spots
- An old resurfacing that’s failing
- Stains that will not shift
Comparing quotes
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- What happens if they find more damage
- What prep work is covered
Repair or replace in Thorpe Green?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Thorpe Green customers choose us
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- Honest advice, even when it means no job
Read our full price list or bath cost comparison.
Common questions in Thorpe Green
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Which areas do you work in?
Across the UK, so Thorpe Green is covered. Our prices are the same everywhere.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
