Lancashire · England
Bath Re-enamelling in Pippin Street
Bath re-enamelling in and around Pippin Street: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
Pippin Street questions
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Pippin Street.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Which areas do you work in?
All of Lancashire, and the rest of the UK. Travel is included in the price.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Do you come to Pippin Street?
Yes. We work across the UK and come to Pippin Street. Send pictures and we will quote, or call 0345 017 0787.
Bath re-enamelling at your home in Pippin Street
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We are often asked to fix an outdated colour you’d like to change and worn patches where water runs and sits, in pressed steel baths, Victorian roll-tops and acrylic baths.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Pippin Street (PR6)
- County
- Lancashire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Pippin Street
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Signs it’s time to call us include:
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
Before you book anyone
- Aftercare advice
- What protection goes down before work starts
- How long it needs to cure
- Whether the price is fixed and includes VAT
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Pippin Street. What changes the price is:
- Access to the area
- The size and number of damaged areas
- The colour and finish to match
- What kind of damage it is
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Any details about the material
- One sharp close-up of the damage
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
Upload a picture of the damage and a wider shot of the whole item, and tell us you are in Pippin Street, and we’ll come back with a fixed quote.
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
- We’ll tell you if it’s not worth repairing
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or bath cost comparison.
Where we work around Pippin Street
Pippin Street is about 2 miles south-east of Bamber Bridge, in Lancashire. Customers in Pippin Street get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Pippin Street is one of 482 towns and villages in Lancashire where we work. We work right across the region, from Pippin Street to Manchester (about 23 miles away).
Here we cover the PR6 postcode area. We also cover the places around Pippin Street: Brindle (1 mile east), Thorpe Green (1 mile south), Clayton Brook (1 mile south-west), Jack Green (1 mile north-east) and Top o' th' Lane (1 mile south). Further out, we also cover Preston (5 miles north-west), Chorley (5 miles south), Accrington (11 miles east), Leyland (3 miles south-west), Fulwood (6 miles north-west) and Rawtenstall (14 miles east).
Around Pippin Street
Typical jobs here are in homes near St James' Church, Walton-le-Dale High School and Clayton Brook Primary School and the streets around them. The nearest railway station is Bamber Bridge station, roughly 1.9 miles north-west of the centre. Well-known places in the area include Chorley and South Ribble District General Hospital (3.5 miles south) and South Ribble Museum (1.7 miles north). Green spaces nearby include Healey Nab and Brockholes.
Towns and villages near Pippin Street
More services for Pippin Street
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs right away
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we can’t put right
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take most of the day.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the next day.
Preparing for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Let the surface dry out before the visit
How to get a price
If you’re in Pippin Street and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Landlord and trade work in Pippin Street
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
