Lancashire · England
Bath Re-enamelling in Jack Green
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Jack Green. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Chips and rust in more than one place
- Stains that will not shift
How the visit works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Getting a price
The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
Bath re-enamelling in Jack Green, done in place
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on pressed steel baths, acrylic baths and Victorian roll-tops, and common reasons people contact us are stains that won’t shift and a dull, rough surface that won’t come clean.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Jack Green (PR6)
- Region
- Lancashire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Jack Green
Which areas do you work in?
We cover the entire UK, including Jack Green and the rest of Lancashire. Just include your postcode and we’ll offer you dates.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why us?
- We’ll tell you if it’s not worth repairing
- A fixed quote before booking
- No extra charge for your area
- Most jobs done in one visit
Take a look at our full price list or resurfacing vs replacement cost guide.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What affects the price in Jack Green
Prices start from £350. Every quote is fixed and free. What we take into account:
- Unusual colours or finishes
- Doing more than one item at once
- The material and finish
- The size and number of damaged areas
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Quotes from your pictures
Before you send photos, a few simple things make all the difference:
- Natural light rather than flash
- Details of any past repairs
- One picture of the whole bath
- A coin or ruler next to the damage for scale
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Rinse off hair dye, oils and bath bombs immediately
- Use washing-up liquid and a soft cloth
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
When we would advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Covering Jack Green
Jack Green is about 2 miles east of Bamber Bridge, in Lancashire. Jobs in Jack Green are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Jack Green is one of 482 places in Lancashire where we work. We work right across the region, from Jack Green to Manchester (23 miles away).
Our visits in PR6 are booked in the same way as anywhere else. Streets in the area include Hill House Lane and Oram Road, and we cover them all. If you’re just outside Jack Green, we cover Gregson Lane (1 mile north-west), Brindle (1 mile south), Pippin Street (1 mile south-west), Coupe Green (1 mile north-west) and Thorpe Green (1 mile south-west). Larger places within reach include Preston (5 miles north-west), Burnley (15 miles east), Chorley (5 miles south), Accrington (10 miles east), Leyland (4 miles south-west) and Fulwood (6 miles north-west).
Around Jack Green
Locally, our jobs take us to homes close to Roman Catholic Church of St Joseph, St Joseph's Catholic Primary School and Walton-le-Dale High School, among other places. The closest station to Jack Green is Bamber Bridge station, about 2.2 miles west. A little further out are South Ribble Museum (1.1 miles north-west) and Chorley and South Ribble District General Hospital (4.4 miles south). Not far away are Brockholes and Healey Nab.
When to call us in Jack Green
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Clients usually contact us about:
- A coating lifting around the plughole
- Wear marks under the taps
- Stains that will not shift
- An original cast iron bath that needs restoring
What to look for in a quote
- How your room will be protected
- What aftercare is recommended
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
Also near Jack Green
Other services in Jack Green
About our accreditations · Every repair comes with a one-year guarantee.
