Lancashire · England
Bath Re-enamelling for Clayton Brook homes
Bath re-enamelling across Clayton Brook and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
What we’re called out for in Clayton Brook
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People typically call us when they notice something like this:
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- A roll-top that’s seen better days
Comparing quotes
- How long the guarantee is and what it covers
- How long it needs to cure
- If travel is included in the price
- What prep work is covered
About our bath re-enamelling in Clayton Brook
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, with the bath ready to use the following day. We work on Victorian roll-tops, acrylic baths and cast iron baths, and people most often call us about worn patches where water runs and sits and an outdated colour you’d like to change.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Location
- Clayton Brook (PR5, PR6)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Clayton Brook
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It usually takes a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Getting a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Common questions in Clayton Brook
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Are there extra charges for Clayton Brook?
There’s no separate call-out charge. Your fixed price includes everything.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Avoid suction-cup mats
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Clayton Brook clients choose us
- Free fixed quotes from pictures
- One price list for the entire UK
- Straight answers about what a repair can do
- Colour mixed on the day to match
Take a look at our full price list and bath cost comparison.
Covering Clayton Brook
Clayton Brook is about 2 miles south-east of Bamber Bridge, in Lancashire. Jobs in Clayton Brook are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover 482 places in Lancashire, from the larger towns to small villages. You can also see our page for Manchester, about 24 miles away.
Jobs in PR5 and PR6 work the same way as everywhere else we cover. Local streets include Gough Lane, Sandy Lane and Preston Road, all of which we cover. Clayton Brook is on the M61, which makes it straightforward to reach. Neighbouring places we cover include Thorpe Green (1 mile east), Pippin Street (1 mile north-east), Top o' th' Lane (1 mile south-east), Cuerden (1 mile west) and Brindle (1 mile east). Larger places within reach include Preston (5 miles north-west), Chorley (4 miles south), Lytham St Anne's (15 miles west), Accrington (12 miles east), Leyland (3 miles south-west) and Fulwood (6 miles north-west).
Near you in Clayton Brook
In Clayton Brook, that means homes near St Bede's Catholic Primary School, Brownedge St Mary's Catholic High School and Church of St Bede and Attached Presbytery and the streets around them. For rail, the closest station is Bamber Bridge station, about 1.5 miles north-west. Well-known places in the area include Chorley and South Ribble District General Hospital (3 miles south) and Penwortham Castle (4.7 miles north-west). For a walk, there’s Brockholes and Healey Nab.
Prices and what affects them
Resurfacing from £350. We price every job individually. What matters most is:
- The size and number of damaged areas
- How easy the damage is to reach
- The material and finish
- What kind of damage it is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send photos for a quote
It only takes a minute to photograph the damage. Please include:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Whether it’s been repaired or coated before
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Nearby places to Clayton Brook
Also in Clayton Brook
About our accreditations · Every repair comes with a one-year guarantee.
