Cornwall · England
Bath Re-enamelling for Threemilestone homes
Bath re-enamelling across Threemilestone and nearby, normally in one visit.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that’s seen better days
Bath re-enamelling in Threemilestone without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough, we can help, on cast iron baths, acrylic baths and pressed steel baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Threemilestone (TR3)
- Area hub
- Cornwall
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Threemilestone questions
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Places near Threemilestone
More services for Threemilestone
Our work in Threemilestone
Threemilestone is about 3 miles west of Truro, in Cornwall. Across the TR3 area, we come to you. Our technicians cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
We work across TR3. You’ll find streets such as Pengelly Way, Deeble Close and Hawthorn Way, all of which we cover. We also travel to Tomperrow (1 mile south-west), Jolly's Bottom (2 miles west), Chacewater (2 miles west), Carnhot (2 miles west) and Bissoe (2 miles south). Within a short drive, we also cover Truro (3 miles east), Newquay (11 miles north), Falmouth (8 miles south), Camborne (9 miles west), Redruth (5 miles west) and Helston (13 miles south-west).
Landmarks near Threemilestone
Typical jobs here are in homes near Richard Lander School, St Michael's Church and Threemilestone School and the streets around them. The closest station to Threemilestone is Truro station, about 2.3 miles east. Nearby you’ll also find Carrick (2.7 miles east) and Old Kiln Museum (2.5 miles east). The countryside around Threemilestone includes Daubuz Moors.
Do you need bath re-enamelling in Threemilestone?
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- A roll-top that is seen better days
- Staining under the taps and around the waste
Comparing quotes
- When it can be used again
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- If travel is included in the price
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We look at:
- Where the damage is and how we get to it
- Whether we combine several jobs
- How hard the colour is to match
- The size and number of damaged areas
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Natural light rather than flash
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Aftercare tips
To keep it looking its best:
- Respect the curing time we give you
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
What you get with us
- No need to remove anything
- Colour mixed on the day to match
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Read our full price list and guide to resurfacing and replacement costs.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
