Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Tiers Cross, Pembrokeshire
Local bath re-enamelling for Tiers Cross: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Stains that won’t shift
Should you replace it?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.
Why choose Surface Doctor in Tiers Cross
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
- Everything repaired in place
- Free fixed quotes from pictures
See our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Tiers Cross
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. Whether it’s chips and rust in more than one place and a peeling or bubbling previous coating, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Tiers Cross (SA62)
- Region
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also in Tiers Cross
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Tiers Cross and the surrounding area
Tiers Cross is about 3 miles north of Milford Haven, in Pembrokeshire. We travel to customers in Tiers Cross and nearby villages, so there is no workshop to go to. We work in 223 places across Pembrokeshire, from the larger towns to small villages.
Here we cover the SA62 postcode area. Whether you live on Bulford Road, Tudor Place and Deer Park Close or a nearby road, a technician can come to you. Neighbouring places we cover include Denant (2 miles north-east), Thornton (2 miles south), Steynton (2 miles south), Priory (2 miles south) and Liddeston (2 miles south). Larger places within reach include Haverfordwest (4 miles north-east), Milford Haven (3 miles south), Pembroke (8 miles south-east), Pembroke Dock (6 miles south-east), The Marsh (4 miles north-east) and Dinbych-y-Pysgod (15 miles east).
Landmarks near Tiers Cross
Around Tiers Cross, we work in homes near Welcome Traveller Inn and Milford Haven School and the streets around them. The nearest railway station is Johnston station, roughly 1.6 miles east of the centre. Well-known places in the area include Withybush General Hospital (4.9 miles north-east) and Romans Castle (0.8 miles west). Open spaces near Tiers Cross include Boltonhill and Hubberstown Pill.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Tiers Cross as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
The process
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day in most cases. The room is left tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let us know about parking or access
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
Getting a price
Send us a photo of the damage and one of the whole item, and tell us you’re in Tiers Cross, and we will come back with a fixed quote.
Advice
When we’d advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly.
Materials we work on in Tiers Cross
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Aftercare tips
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Do not let dyes or oils sit on the finish
- Do not leave a chip unrepaired
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Tiers Cross questions
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you work in Tiers Cross?
Yes. We cover the whole UK and come to Tiers Cross. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens once I’ve sent photos?
You will get a fixed quote back, normally with dates to choose from. There’s no obligation to book.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
When to call us in Tiers Cross
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Get in touch if you’ve noticed:
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- A roll-top that’s seen better days
- Staining under the taps and around the waste
Before booking anyone
- What protection goes down before work starts
- How changes to the job are handled
- How long the guarantee is and what it covers
- If travel is included in the price
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
