Cambridgeshire · England
Bath Re-enamelling in Tilbrook
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Tilbrook. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Wear marks under the taps
Bath re-enamelling at your home in Tilbrook
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on Victorian roll-tops, basins & shower trays and pressed steel baths, and the jobs we see most are a bath that stays dull however much you clean it and a period or roll-top bath worth keeping.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Tilbrook (PE28)
- County
- Cambridgeshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Tilbrook
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
What happens next?
We review the photos and send a fixed quote with dates.
Do you come to Tilbrook?
Yes, we do. We send a technician to Tilbrook for every job, and the price is the same as everywhere else.
Looking after it afterwards
Once the work has cured, treat it gently:
- Repair dripping taps early
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
- Wipe the bath dry after use in hard water areas
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why Tilbrook customers choose us
- We leave the room as we found it
- Most jobs done in one visit
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
See our full price list and bath cost comparison.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
More services for Tilbrook
Covering Tilbrook
Tilbrook is about 8 miles east of Rushden, in Cambridgeshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Tilbrook is one of 371 places in Cambridgeshire where we work. Our nearest city page is London, about 58 miles away.
Postcode districts we cover here: PE28. Streets in the area include Station Road and High Street, all of which we cover. If you are just outside Tilbrook, we cover Lower Dean (2 miles west), Covington (2 miles north-west), Catworth (2 miles north), Hargrave (3 miles west) and Brington (4 miles north). Larger places within reach include St Neots (9 miles south-east), Huntingdon (10 miles east), St Ives (14 miles east), Godmanchester (11 miles east), Brampton (8 miles east) and Sawtry (10 miles north-east).
Near you in Tilbrook
Our customers here include homes close to Church of All Saints and The White Horse Public House, among other places. Further afield, we also cover the area around Kimbolton Castle (1.7 miles south-east) and Dean (1.9 miles west). Open spaces near Tilbrook include Shepherd's Close.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- How many areas need work
- Access to the area
- The type of damage
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
You can usually get a fixed price without us visiting. To help us price it:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- Details of any past repairs
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Let us know which floor the room is on
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
When a repair isn’t the answer
A repair isn’t right for every job, including:
- A metal bath with a through crack
- Steel that has corroded right through
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Do you need bath re-enamelling in Tilbrook?
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
If you can see any of these, send us a picture:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Wear marks under the taps
- Chips and rust in more than one place
Questions to ask before booking
- Whether a trained technician does the job
- What happens if the damage is worse than the photos show
- How the colour is matched
- When it can be used again
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
