Gloucestershire · England
Bath Re-enamelling in Tiltups End
Damaged bath in Tiltups End? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
How it works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Make sure the room can be ventilated
- Keep pets and children out of the room while we work
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Advice
Bath re-enamelling in Tiltups End without replacing anything
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Common call-outs are for a coloured bath you want in white and lots of chips and rust spots, in cast iron baths, Victorian roll-tops and acrylic baths.
Big or small, it’s backed by a one-year guarantee in Tiltups End and across Gloucestershire.
- Area
- Tiltups End (GL6)
- Area hub
- Gloucestershire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- The material and finish
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Quotes from your photos
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Something in shot to show the size
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Our work in Tiltups End
Tiltups End is about 5 miles south of Stroud, in Gloucestershire. Clients in Tiltups End get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Tiltups End is one of 470 towns and villages in Gloucestershire where we work. Our jobs stretch from Tiltups End to Birmingham (57 miles away).
Our visits in GL6 work the same way as everywhere else we cover. Close by, we cover Barton End (1 mile north), Horsley (1 mile north-west), Newmarket (2 miles north), Nailsworth (2 miles north) and Kingscote (2 miles west). Within a short drive, we also cover Gloucester (12 miles north), Stroud (5 miles north), Cirencester (12 miles east), Brockworth (12 miles north), Quedgeley (11 miles north) and Lydney (13 miles west).
Landmarks near Tiltups End
Around Tiltups End, we work in homes near Horsley Church of England Primary School and Church of St Martin. For rail, the closest station is Stroud station, about 4.9 miles north of the centre. Other landmarks nearby include Beverston Castle (2.1 miles south-east) and Dunkirk Mill Museum (2.1 miles north). The countryside around Tiltups End includes Woodchester Park and Coaley Peak.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Common questions in Tiltups End
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you come to Tiltups End?
Yes. We cover the entire UK and travel to Tiltups End. Send photos and we will quote, or call 0345 017 0787.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What happens next?
You’ll get a fixed quote back. You are under no obligation.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Do you need bath re-enamelling in Tiltups End?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- Several chips and rust patches
- Brown or grey marks that do not clean off
- Thin, worn enamel in places
Questions to ask before booking
- How to care for the finish
- Whether the colour is mixed to match
- What happens if they find more damage
- Who turns up on the day
Nearby places to Tiltups End
What else we do in Tiltups End
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, with the bath back in use the next day. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Tiltups End clients choose us
- Rooms protected and left tidy
- Everything repaired in place
- Generally one visit, start to finish
- Fixed prices from your photos
Read our pricing or bath cost comparison.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
