Cornwall · England
Bath Re-enamelling for Trebilcock homes
Bath re-enamelling in Trebilcock without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coating lifting around the plughole
Bath re-enamelling in Trebilcock, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s a roll-top that’s seen better days and wear marks under the taps, we can help, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Trebilcock (PL26)
- County
- Cornwall
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
Repairing versus replacing in Trebilcock
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Dust sheets down, tidy finish
- Colour-matched on site
- Most jobs done in one visit
- Work done at your home or business
Read our pricing and guide to resurfacing and replacement costs.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What else we do in Trebilcock
FAQs for Trebilcock
It’s been repaired before. Can you still fix it?
Usually, yes. The old repair comes out first, so let us know about it.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is there a smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- What kind of damage it is
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The material
The price reflects the work involved, not where you live. You will see the full price before you book.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- One picture of the entire bath
- Natural light rather than flash
- The material, if you know it
- A coin or ruler next to the damage for scale
For a price in Trebilcock, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
What we are called out for in Trebilcock
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is normally perfectly sound.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- An old resurfacing that is failing
- A roll-top that is seen better days
Comparing quotes
- How your room will be protected
- Who will actually do the work
- Whether the price covers travel
- How long it needs to cure
Covering Trebilcock
Trebilcock is about 5 miles north-west of St Austell, in Cornwall. Customers in Trebilcock get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Trebilcock is one of 644 towns and villages in Cornwall where we work.
Postcode districts we cover here: PL26. We regularly work on streets such as Victoria Road and Pentre Close and the roads around them. Nearby, we also work in Victoria (1 mile north), Roche (1 mile south-west), Trezaise (1 mile south), Hallew (2 miles south-east) and Gracca (2 miles south-east). We also work in nearby towns such as Truro (14 miles south-west), Newquay (11 miles west), St Austell (5 miles south-east), Bodmin (6 miles north-east), Sandy Bottom (6 miles south-east) and Bethel (6 miles south-east).
Local landmarks in Trebilcock
Typical jobs here are in homes near Roche Community Primary School, The Victoria Inn and Church of St Gomonda and the streets around them. There is a railway station in Trebilcock itself: Roche station. Other landmarks nearby include Luxulyan Museum And Heritage Centre (3.9 miles south-east) and Bodmin Hospital (5.3 miles north-east). The countryside around Trebilcock includes Hensbarrow Beacon and Tresayes Quarry.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Trebilcock
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
