Pembrokeshire · Wales
Bath Re-enamelling for Trecwn homes
Full bath re-enamelling and resurfacing in Trecwn, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
How we handle bath re-enamelling in Trecwn
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on basins & shower trays, acrylic baths and Victorian roll-tops, and common reasons people contact us are a dull, rough surface that won’t come clean and brown or grey marks that don’t clean off.
Every repair comes with a one-year guarantee.
- Location
- Trecwn (SA62)
- Area hub
- Pembrokeshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
- Don’t leave a chip unrepaired
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Landlords, agents and businesses in Trecwn
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Trecwn and the surrounding area
Trecwn is about 11 miles north of Haverfordwest, in Pembrokeshire. From the centre of Trecwn to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Trecwn is one of 223 places in Pembrokeshire we cover.
Here we cover the SA62 postcode area. From Barham Road and Wesley Place or anywhere nearby, a technician can come to you. We also cover the places around Trecwn: Scleddau (2 miles west), Fishguard and Goodwick (2 miles north-west), Fishguard (3 miles north-west), Lower Town (3 miles north) and Letterston (3 miles south-west). Further out, we also cover Haverfordwest (11 miles south), The Marsh (11 miles south), Goodwick (4 miles north-west), Penyraber (3 miles north-west), Narberth (14 miles south-east) and Tyddewi (14 miles west).
What’s near Trecwn
For rail, the closest station is Fishguard & Goodwick station, about 3.6 miles north-west of the centre. Further afield, we also cover the area around Summerton Camp (2.1 miles south-east) and Ein Hanes (2.6 miles north-west). Open spaces near Trecwn include Mathry Road sand pit and Pentre Newydd Hill.
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface with the bath left where it is. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why book with us
- Typically one visit, start to finish
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Work done at your home or business
Take a look at our prices page and bath cost comparison.
Nearby places to Trecwn
Other services in Trecwn
Trecwn: your questions answered
Do you come to Trecwn?
We do. We send a technician to Trecwn for every job, with no extra charge for travel.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your photos and you’ll get one combined price.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know if it has been repaired before
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
Send us photos and we’ll tell you honestly before booking.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What affects the price in Trecwn
Resurfacing from £350. You will know the full cost before booking. We take into account:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The size and number of damaged areas
- The colour and finish to match
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- Any details about the material
- One picture of the whole bath
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
What we’re called out for in Trecwn
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- Chips and rust in more than one place
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
What your quote should include
- The length of the guarantee and what it covers
- What protection goes down before work starts
- How long it needs to cure
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
