Cornwall · England

Bath re-enamelling & resurfacing in Treknow, Cornwall

We travel to Treknow for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Treknow

Covering Treknow

Treknow is about 13 miles north of Bodmin, in Cornwall. We visit homes and businesses in Treknow, so you don’t need to take anything anywhere. Our repair technicians cover 644 places across Cornwall, from the larger towns to small villages.

Jobs in PL34 work the same way as everywhere else we cover. From Palmers Terrace and Atlantic Close or a nearby road, we can come to you. Nearby, we also work in Trelake (1 mile south), Tintagel (1 mile north), Trenale (1 mile north-east), Bossiney (1 mile north) and Delabole (2 miles south-east). Larger places within reach include Bodmin (13 miles south), Bude (15 miles north-east), Wadebridge (10 miles south), Padstow (11 miles south-west), Camelford (4 miles south-east) and Boscastle (3 miles north-east).

Landmarks near Treknow

Around Treknow, we work in homes near Tintagel Parish Church and Tintagel Primary School. Well-known places in the area include Museum of Witchcraft and Magic (3.7 miles north-east) and Tintagel Castle (1.3 miles north). The countryside around Treknow includes Condolden.

Map of Treknow © OpenStreetMap contributors

Bath re-enamelling in Treknow without replacing anything

Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Typical jobs include wear marks under the taps and staining under the taps and around the waste, across basins & shower trays, pressed steel baths and acrylic baths.

A one-year guarantee comes as standard.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Treknow (PL34)
County
Cornwall
Cover
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026

Your questions about bath re-enamelling in Treknow

Can you re-enamel a roll-top bath?

Yes, often. We resurface the inside, and the outside can be refinished too.

How long will the bath be out of use?

Typically one day, with the bath ready the next day. Deeply pitted baths may need a second day.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

Does re-enamelling smell?

Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What happens after I send photos?

We come back with a fixed quote, usually with dates to choose from. You are under no obligation.

Common problems we fix in Treknow

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

These are the problems we are asked about most:

  • Wear marks under the taps
  • A bath that stays dull however much you clean it
  • A roll-top that is seen better days
  • A coating lifting around the plughole

What your quote should include

  • What preparation is included
  • What happens if the damage is worse than the pictures show
  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?

10 questions to ask before you book

What a repair can’t fix

Some jobs aren’t right for a repair, including:

  • A bath that is rusted through
  • Acrylic that moves when you stand in it
  • Leaks from fittings rather than the bath

Not sure? Send photos and we’ll give you a straight answer before booking.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays

How to care for the repair

Nothing complicated is needed:

  • Never use suction bath mats
  • Dry the bath after use to stop limescale
  • Don’t let dyes or oils sit on the finish
  • Repair dripping taps early

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

The process

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll take it from there. Most visits take most of the day, including clearing up.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Point us to the nearest place to park
  • Make sure the area is dry
  • Make sure the room can be ventilated

How to get a price

A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Get a free quote

Read more

Repairing versus replacing in Treknow

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Why Treknow clients choose us

  • One-year guarantee on every repair
  • Free fixed quotes from pictures
  • No need to remove anything
  • Straight answers about what a repair can do

Read our prices page or guide to resurfacing and replacement costs.

Prices and what affects them

Resurfacing from £350. There is no area surcharge for Treknow. What changes the price is:

  • How easy the damage is to reach
  • Unusual colours or finishes
  • Whether we combine several jobs
  • The material

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what helps:

  • A close-up of the damage, in focus
  • A wider photo showing the entire bath
  • Natural light rather than flash
  • Any earlier repairs or coatings

To get a price, send a couple of photos through our quote form or ring us. We will say immediately whether it can be repaired.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

For landlords and businesses

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.