Greater London · England
Bath Re-enamelling in Tulse Hill
Bath re-enamelling in Tulse Hill without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
About our bath re-enamelling in Tulse Hill
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Common call-outs are for a roll-top that’s seen better days and chips and rust in more than one place, across cast iron baths, pressed steel baths and basins & shower trays.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Tulse Hill (SW2, SE24, SE27)
- County
- Greater London
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Covering Tulse Hill
Tulse Hill is about 1 mile north-east of Streatham, in Greater London. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Tulse Hill is one of 764 towns and villages in Greater London we cover.
We cover every part of the SW2, SE24 and SE27 postcode area. You’ll find streets such as Ostade Road, Medora Road and Palace Road. You’ll find Tulse Hill on the A204, which makes it straightforward to reach. Neighbouring places we cover include Streatham Hill (1 mile south-west), Brixton (1 mile north-west), Clapham Park (1 mile north-west), Hyde farm estate (1 mile west) and Streatham (1 mile south-west). We also work in nearby towns such as London (4 miles north), City of Westminster (5 miles north), Marylebone (5 miles north), Kensington (6 miles north-west), St Pancras (6 miles north) and Shoreditch (6 miles north).
Near you in Tulse Hill
We visit homes around Fenstanton Primary School, Tulse Hill School and Belair Park, among other places. Nearby too are The Commercial pub (0.6 miles north-east), St Martin-In-The-Fields High School for Girls (under half a mile south-west) and Holy Trinity Church (within half a mile south-west). Tulse Hill has its own railway station: Tulse Hill station. Further afield, we also cover the area around Dulwich Community Hospital (1.5 miles north-east) and Streatham Hill (0.7 miles south-west). For a walk, there’s Knight's Hill and Battersea Park Lake.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
For anyone letting property in or around Tulse Hill, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- How many items we do on one visit
- What the surface is made of
- Unusual colours or finishes
- Where the damage is and how we get to it
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- Where you are, by postcode
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Aftercare tips
To keep it looking its best for years:
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
- Get any chip repaired quickly
- Respect the curing time we give you
Dry the bath after use if possible, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
How it works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Ensure the area is dry
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Why book with us
- Free fixed quotes from pictures
- One price list for the entire UK
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
Read our prices page or bath cost comparison.
Tulse Hill: your questions answered
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your photos and you will get one combined price.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
When to call us in Tulse Hill
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Typical reasons for a call-out include:
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
- Thin, worn enamel in places
- Lots of chips and rust spots
What to look for in a quote
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
Nearby places to Tulse Hill
More services for Tulse Hill
About our accreditations · Every repair comes with a one-year guarantee.
