Lancashire · England
Bath re-enamelling & resurfacing in Tunstall, Lancashire
We travel to Tunstall for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
About our bath re-enamelling in Tunstall
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We work on cast iron baths, acrylic baths and pressed steel baths, and common reasons people get in touch are thin, worn enamel in places and a dull, rough surface that won’t come clean.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Tunstall (LA6)
- Region
- Lancashire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Holes rusted through the metal
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we work on in Tunstall
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
When to call us in Tunstall
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
You may need us if you’ve spotted:
- Lots of chips and rust spots
- A coloured bath you want in white
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Comparing quotes
- When it can be used again
- What the guarantee covers, and for how long
- How the colour is matched
- Who will actually do the work
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Why book with us
- A year’s guarantee on all work
- We leave the room as we found it
- One visit for most repairs
- Colours mixed by hand to suit your surface
See our full price list or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
FAQs for Tunstall
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Do you cover the entire of Lancashire?
The whole UK, including all of Lancashire. Send your postcode with your pictures and we will confirm dates.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Lancashire.
Also near Tunstall
Also in Tunstall
Landlord and trade work in Tunstall
If you manage property in Tunstall, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- How hard the colour is to match
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
You can normally get a fixed quote without us visiting. To help us price it:
- A wider photo showing the whole bath
- Details of any past repairs
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Our work in Tunstall
Tunstall is about 11 miles north-east of Lancaster, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Tunstall is one of 482 towns and villages in Lancashire where we work. Our jobs stretch from Tunstall to Leeds (about 49 miles away).
We cover every part of LA6. You will find streets such as Back Lane, Coneygarth Lane and Church Lane, and we cover them all. If you’re just outside Tunstall, we cover Newton (1 mile north-west), Whittington (2 miles north), Arkholme (2 miles south-west), Melling (2 miles south) and High Biggins (3 miles north). We also work in nearby towns such as Lancaster (11 miles south-west), Morecambe (12 miles south-west), Heysham (14 miles south-west), Westfield War Memorial Village (11 miles south-west), Sandylands (13 miles south-west) and Carnforth (7 miles west).
Landmarks near Tunstall
Around Tunstall, we work in homes near St John the Baptist's Church and the streets around them. The nearest railway station is Wennington station, about 2.5 miles south. Nearby you’ll also find Thurland Castle (0.5 miles south-east).
About our accreditations · Every repair comes with a one-year guarantee.
