Lancashire · England

Bath re-enamelling & resurfacing in Melling, Lancashire

Bath re-enamelling for Melling, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Melling

Bath re-enamelling in Melling without replacing anything

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Common call-outs are for thin, worn enamel in places and an outdated colour you’d like to change, across basins & shower trays, Victorian roll-tops and cast iron baths.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Where
Melling (LA6, LA2)
County
Lancashire
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

Prices and what affects them

Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:

  • The material and finish
  • How many items we do on one visit
  • What kind of damage it is
  • The size and number of damaged areas

Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

Phone pictures are fine. Just ensure we can see:

  • A coin or ruler next to the damage for scale
  • What it’s made of, if you know
  • Details of any past repairs
  • Your postcode, so we can check dates

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Repairs by material

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Do you need bath re-enamelling in Melling?

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Contact us if you’ve noticed:

  • Worn patches where water runs and sits
  • Brown or grey marks that do not clean off
  • Several chips and rust patches
  • A dull, rough surface that won’t come clean

Before you book anyone

  • Is the price fixed, and does it include VAT?
  • Whether there are any call-out or travel charges
  • How your room will be protected
  • Aftercare advice

10 questions to ask before booking

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

Questions from Melling

Do you need to take the bath out?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before.

Do you come to Melling?

Yes. We work across the UK and travel to Melling and the rest of Lancashire. Send photos and we’ll quote, or call 0345 017 0787.

Is my repair covered?

Every repair comes with a one-year guarantee. We will explain what it covers when we quote.

Will the price change on the day?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

How long will the bath be out of use?

Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Honest limits

Some jobs aren’t right for a repair, including:

  • Holes rusted through the metal
  • Anything hidden under an old coating, until we remove it
  • A poorly supported acrylic bath, until it’s firmed up

If in doubt, send photos and we’ll say what we think before booking.

What we work on

  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Basins & shower trays

About Melling

Melling is about 10 miles north-east of Lancaster, in Lancashire. From the centre of Melling to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Melling is one of 482 places in Lancashire where we work. Our jobs stretch from Melling to Manchester (48 miles away).

Postcode districts we cover here: LA6 and LA2. We also travel to Arkholme (1 mile north-west), Tunstall (2 miles north), Gressingham (2 miles south-west), Hornby (2 miles south-west) and Newton (2 miles north). Larger places within reach include Lancaster (10 miles south-west), Morecambe (11 miles south-west), Heysham (13 miles south-west), Westfield War Memorial Village (10 miles south-west), Sandylands (12 miles south-west) and Carnforth (6 miles west).

Local landmarks in Melling

Our customers here include homes close to Melling St Wilfrid Church of England Primary School, Melling Hall Hotel and St Wilfrid's Church and the streets around them. For rail, the closest station is Wennington station, roughly 1.3 miles south-east. Nearby you’ll also find Thurland Castle (1.3 miles north-east).

Map of Melling © OpenStreetMap contributors

How it works

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s usually ready the next day.

How to prepare

  • Keep a parking space free if you can
  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a fixed price

Read more

Aftercare tips

Simple care helps the repair last. We recommend:

  • Stick to gentle, non-abrasive cleaners
  • Don’t leave a chip unrepaired
  • Keep suction mats out of the bath
  • Respect the curing time we give you

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.

Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.

Landlords, agents and businesses in Melling

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.