Oxfordshire · England
Bath re-enamelling & resurfacing in Turville, Oxfordshire
Full bath re-enamelling and resurfacing in Turville, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
Our work in Turville
Turville is about 6 miles north-west of Marlow, in Oxfordshire. Customers in Turville get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Turville is one of 443 towns and villages in Oxfordshire where we work. Our nearest city page is London, about 35 miles away.
Jobs in RG9 work the same way as everywhere else we cover. We regularly work on streets such as Holloway Lane and School Lane and the roads around them. Other places close to Turville include Fingest (1 mile east), Cadmore End (1 mile north-east), Little Frieth (2 miles east), Frieth (2 miles east) and Bolter End (2 miles east). Further out, we also cover Didcot (15 miles west), Thame (10 miles north), Henley-on-Thames (6 miles south), Benson (9 miles west), Chinnor (6 miles north) and Tilehurst (12 miles south-west).
Local landmarks in Turville
We visit homes around Ibstone CofE Primary School, Church of St Mary and The Bull And Butcher pub and the streets around them. A little further out are Marlow Community Hospital (6 miles south-east). Green spaces nearby include Warburg Nature Reserve and Bald Hill.
How we handle bath re-enamelling in Turville
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. We regularly repair pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a peeling or bubbling previous coating and a bath that stays dull however much you clean it.
Whatever the size of the job, you get the same one-year guarantee in Turville and across Oxfordshire.
- Area
- Turville (RG9)
- Area hub
- Oxfordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common problems we fix in Turville
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
The things customers usually mention when they call include:
- Worn patches where water runs and sits
- A coloured bath you want in white
- Staining under the taps and around the waste
- Chips and rust in more than one place
Before booking anyone
- What prep work is covered
- Whether the price covers travel
- How long the guarantee is and what it covers
- How long it needs to cure
Towns and villages near Turville
More services for Turville
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It usually takes a full day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Read more
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the whole room anyway. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there is no premium for Turville. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- Fixed prices from your pictures
- Straight answers about what a repair can do
Read our prices page or resurfacing vs replacement cost guide.
What a repair cannot fix
A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
What bath re-enamelling costs
Prices start from £350. There’s no charge for travel to Turville. The price depends on:
- Any earlier repairs that need removing first
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- Daylight if possible, and no flash reflection
- A picture taken from further back
- A coin beside the damage so we can judge size
- What it’s made of, if you know
If you are in Turville and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Common questions in Turville
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Do you cover Turville?
Yes. We cover the entire UK and travel to Turville and the rest of Oxfordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
About our accreditations · Every repair comes with a one-year guarantee.
