Oxfordshire · England
Bath Repair in Turville
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Turville. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Hairline or through cracks in acrylic
Bath repair in Turville, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We regularly repair cast iron enamel, acrylic and roll-top & freestanding, and the jobs we see most are a chipped rim or side and rusty patches near the plughole.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.
- Area
- Turville (RG9)
- Region
- Oxfordshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Looking after it afterwards
Once the work has cured, treat it gently:
- Do not scrub with anything abrasive
- Do not leave razors or cans standing in the bath
- Make sure an acrylic bath is firm underfoot
- Protect the bath with a towel when doing jobs nearby
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Turville questions
How long does the repair take to cure?
Generally within a day, though it depends on what we have done.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Oxfordshire.
What areas do you cover?
The whole UK, including all of Oxfordshire. Send your postcode with your photos and we will confirm dates.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What happens after I send photos?
We review the pictures and send a fixed quote with dates.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you are welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Ensure the room can be ventilated
- Tell us if there are stairs or a lift
- Ensure the area is dry
Get a quote
If you’re in Turville and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Nearby places to Turville
More services for Turville
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Turville
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we are called out for in Turville
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Look out for any of the following:
- A cracked acrylic bath
- Impact holes in acrylic
- A chipped rim or side
- Rust by the waste and overflow
Before you book anyone
- Whether the colour is mixed to match
- How your room will be protected
- What happens if the damage is worse than the pictures show
- Aftercare advice
Where we work around Turville
Turville is about 6 miles north-west of Marlow, in Oxfordshire. Whether you are in the middle of Turville or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 443 towns and villages in Oxfordshire. We work right across the region, from Turville to London (about 35 miles away).
Here we cover the RG9 postcode area. Streets in the area include Holloway Lane and School Lane, all of which we cover. We also travel to Fingest (1 mile east), Cadmore End (1 mile north-east), Little Frieth (2 miles east), Frieth (2 miles east) and Bolter End (2 miles east). Within a short drive, we also cover Didcot (15 miles west), Thame (10 miles north), Henley-on-Thames (6 miles south), Benson (9 miles west), Chinnor (6 miles north) and Tilehurst (12 miles south-west).
Near you in Turville
Locally, our jobs take us to homes close to Ibstone CofE Primary School, Church of St Mary and The Bull And Butcher pub and the streets around them. A little further out are Marlow Community Hospital (6 miles south-east). Not far away are Warburg Nature Reserve and Bald Hill.
How we price bath repair
Repairs from £95. We price every job individually, from your photos. What matters most is:
- Doing more than one item at once
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How much damage there is
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- Details of any past repairs
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Repair or replace in Turville?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Turville. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- We leave the room as we found it
- Generally one visit, start to finish
See our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
