Buckinghamshire · England
Bath re-enamelling & resurfacing in Cadmore End, Buckinghamshire
We travel to Cadmore End for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
Bath re-enamelling in Cadmore End, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. It usually takes one visit, and can be used again the following day. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are lots of chips and rust spots and a roll-top that’s seen better days.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Area
- Cadmore End (HP14)
- Region
- Buckinghamshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Cadmore End
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- No extra charge for your area
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- No need to remove anything
See our pricing or resurfacing vs replacement cost guide.
Towns and villages near Cadmore End
What else we do in Cadmore End
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Our work in Cadmore End
Cadmore End is about 5 miles west of High Wycombe, in Buckinghamshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 263 towns and villages across Buckinghamshire, from the larger towns to small villages. We work right across the region, from Cadmore End to London (34 miles away).
Here we cover the HP14 postcode area. Other places close to Cadmore End include Bolter End (1 mile east), Fingest (1 mile south-west), Wheeler End (1 mile east), Little Frieth (1 mile south) and Horsleys Green (1 mile north). Further out, we also cover Aylesbury (13 miles north), High Wycombe (5 miles east), Chesham (12 miles north-east), Marlow (5 miles south-east), Amersham (12 miles east) and Beaconsfield (9 miles east).
What’s near Cadmore End
Typical jobs here are in homes near Church of St Mary Le Moor, The Peacock pub and Cadmore End CofE School. The nearest railway station is Saunderton station, about 3.8 miles north-east of the centre. Nearby you’ll also find Wycombe Hospital (4.8 miles east) and West Wycombe Rural (2.1 miles north-east). Not far away are Bald Hill and Yoesden.
For landlords and businesses
If you manage property in Cadmore End, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Landlords, letting agents and housing providers in Cadmore End use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Your questions about bath re-enamelling in Cadmore End
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How long is the bath unusable?
One day for most baths, ready the day after. We will confirm timings when we quote.
Do you come to Cadmore End?
We do. Repair technicians travel to Cadmore End from across the region, with no extra charge for travel.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
How to look after the repair
Nothing complicated is needed:
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
The process
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- How many items we do on one visit
- What the surface is made of
- Previous DIY repairs that have to come out
- What kind of damage it is
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any details about the material
- Your postcode, so we can check dates
- Details of any past repairs
- A coin beside the damage so we can judge size
For a price in Cadmore End, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
When to call us in Cadmore End
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Typical reasons for a call-out include:
- A dull, rough surface that will not come clean
- An old resurfacing that’s failing
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
What your quote should include
- If travel is included in the price
- What preparation is included
- Who will actually do the work
- Is the price fixed, and does it include VAT?
About our accreditations · Every repair comes with a one-year guarantee.
