Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Tyning, Bath and North East Somerset
Bath re-enamelling across Tyning and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath in a colour that no longer suits
Bath re-enamelling in Tyning, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, and can be used again the day after. Typical jobs include lots of chips and rust spots and a roll-top that’s seen better days, in acrylic baths, pressed steel baths and cast iron baths.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Tyning (BA2)
- Region
- Bath and North East Somerset
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Tyning
If you manage property in Tyning, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What a repair can’t fix
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
About Tyning
Tyning is about 3 miles north of Midsomer Norton, in Bath and North East Somerset. Across the BA2 area, we come to you. Our repair technicians cover all 136 towns and villages across Bath and North East Somerset.
Our visits in BA2 are booked in the same way as anywhere else. Neighbouring places we cover include Timsbury (1 mile east), Hook (1 mile east), Meadgate West (1 mile east), Farmborough (1 mile north) and Meadgate East (1 mile east). Larger places within reach include Bath (6 miles north-east), Keynsham (6 miles north), Bathwick (7 miles north-east), Walcot (7 miles north-east), Westmoreland (6 miles north-east) and Kingsmead (6 miles north-east).
Around Tyning
Around Tyning, we work in homes near Church of St Mary the Virgin, St Mary's CofE Primary School and The Seven Stars pub. Nearby you will also find Paulton Memorial Hospital (2 miles south) and Oval enclosure (4 miles west). Not far away are Stephen's Vale Nature Reserve and Hunstrete Lake.
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
Looking after it afterwards
So the finish stays in good condition for years:
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- Avoid suction-cup mats
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Tyning questions
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
How much does bath re-enamelling cost in Tyning?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the entire item with your BA2 postcode.
Do you come to Tyning?
Yes, we do. We send a technician to Tyning for every job, and the price is the same as everywhere else.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Do you need bath re-enamelling in Tyning?
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
These are the problems we’re asked about most:
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
- Stains that will not shift
What your quote should include
- What aftercare is recommended
- Who will actually do the work
- How your room will be protected
- Whether the colour is mixed to match
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- One price list for the entire UK
- We come to you, anywhere in the UK
See our full price list and resurfacing vs replacement cost guide.
Nearby places to Tyning
Other services in Tyning
About our accreditations · Every repair comes with a one-year guarantee.
