Herefordshire · England

Bath re-enamelling & resurfacing in Upper Maes-coed, Herefordshire

Bath re-enamelling in Upper Maes-coed without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Upper Maes-coed

Bath re-enamelling in Upper Maes-coed, done in place

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on cast iron baths, acrylic baths and pressed steel baths, and people most often call us about a period or roll-top bath worth keeping and an old resurfacing that’s failing.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Upper Maes-coed (HR2)
Region
Herefordshire
Cover
12 months on all our work
Quotes
From £350. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Do you need bath re-enamelling in Upper Maes-coed?

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

People normally call us after spotting something like this:

  • An original cast iron bath that needs restoring
  • Several chips and rust patches
  • A bath that stays dull however much you clean it
  • A coating lifting around the plughole

Questions to ask before you book

  • When it can be used again
  • Aftercare advice
  • Whether a trained technician does the job
  • What happens if they find more damage

10 questions to ask before you book

How it works

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Keep a parking space free if you can
  • Mention any parking restrictions or tricky access
  • Ensure the area is dry

Ask for a price

To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Send photos for a quote

Advice

What a repair cannot fix

Before booking, it’s worth knowing the limits:

  • A cast iron or steel bath that is cracked right through
  • A poorly supported acrylic bath, until it’s firmed up
  • Problems we cannot see until an old finish comes off

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths

Should you replace it?

Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • One price list for the entire UK
  • Straight answers about what a repair can do
  • No need to remove anything
  • One visit for most repairs

See our full price list and resurfacing vs replacement cost guide.

Landlord and trade work in Upper Maes-coed

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

For anyone letting property in or around Upper Maes-coed, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

DIY kit or professional repair?

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Have chips seen to early
  • Fix dripping taps quickly
  • Store bottles off the bath
  • Clean with a soft cloth and mild detergent

A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Upper Maes-coed: your questions answered

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

What happens if you find more damage?

Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside if you’d like.

How long will the bath be out of use?

Most baths are done in a day, ready the next day. We give you timings with the quote.

Can you quote from photos?

Generally, yes. Clear photos let us give you a fixed quote without visiting.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Do you cover the whole of Herefordshire?

We work UK-wide. Prices don’t change with location.

How quickly can you book me in?

We will give you dates with your quote. Tell us if you need it done quickly.

Upper Maes-coed and nearby

Upper Maes-coed is about 11 miles west of Hereford, in Herefordshire. Wherever you are in the HR2 postcode area, we carry out the work at your property. Upper Maes-coed is one of 255 places in Herefordshire we cover. You can also see our page for Birmingham, about 56 miles away.

Jobs in HR2 are booked in the same way as anywhere else. Neighbouring places we cover include Gilfach (1 mile south-east), Hinton (2 miles north), Peterchurch (3 miles north), Snodhill (3 miles north) and Moccas (5 miles north). Larger places within reach include Hereford (11 miles east), Redhill (11 miles east), Newton Farm (10 miles east), Whitecross (11 miles east), Eign Hill (12 miles east) and Widemarsh (11 miles east).

What’s near Upper Maes-coed

Around Upper Maes-coed, we work in homes near The Bridge Inn, Fairfield High School and Church of St Michael and the streets around them. Further afield, we also cover the area around Urishay Castle (1.7 miles north). Open spaces near Upper Maes-coed include Newbarns Hill and The Parks.

Map of Upper Maes-coed © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.