Orkney Islands · Scotland

Bath Re-enamelling in Upper Sanday

Bath re-enamelling in Upper Sanday without the cost of replacing. Get a fixed quote from your photos, then book a visit.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Upper Sanday

Bath re-enamelling in Upper Sanday without replacing anything

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s staining under the taps and around the waste and chips and rust in more than one place, we can help, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Where
Upper Sanday (KW17)
Area hub
Orkney Islands
Cover
A year, on every repair
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Common questions in Upper Sanday

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can I get a quote without a visit?

Nearly always. If photos don’t show enough, we’ll ask for another angle.

Is repairing better than replacing?

Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

What does bath re-enamelling cost?

Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room protected and ventilated.

When we would advise against a repair

Before booking, it’s worth knowing the limits too:

  • Holes rusted through the metal
  • Leaks from fittings rather than the bath
  • A cast iron or steel bath that is cracked right through

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Cast iron baths
  • Pressed steel baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

Do you need bath re-enamelling in Upper Sanday?

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Contact us if you’ve noticed:

  • A roll-top that is seen better days
  • A peeling or bubbling previous coating
  • Chips and rust in more than one place
  • Stains that will not shift

Questions to ask before booking

  • Whether they match the colour on site
  • How your room will be protected
  • What preparation is included
  • Whether the price covers travel

10 questions to ask before you book

How to look after the repair

Good habits make a big difference to how long a repair lasts:

  • Do not use the bath until it has fully cured
  • Avoid suction-cup mats
  • Have chips seen to early
  • Clean with a soft cloth and mild detergent

A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Different materials, different repairs

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

The process

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes most of the day. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access
  • Keep pets and children out of the room while we work

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

Get a fixed price

Related advice

How we price bath re-enamelling

Resurfacing from £350. There is no area surcharge for Upper Sanday. The price reflects:

  • What the surface is made of
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas

There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

When you take your pictures, these tips help us give you a firm price:

  • Natural light rather than flash
  • A clear, close picture of the problem area
  • One picture of the entire bath
  • Where you are, by postcode

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Our work in Upper Sanday

Upper Sanday is about 7 miles south-east of Kirkwall, in the Orkney Islands. Wherever you are in the KW17 postcode area, we carry out the work at your property. We work in all 51 towns and villages across the Orkney Islands.

Here we cover the KW17 postcode area. If you are just outside Upper Sanday, we cover Toab (2 miles north), Tankerness (3 miles north), St Mary's (3 miles west), Burray Village (6 miles south-west) and Kirkwall (7 miles north-west). Remote and island addresses take a little more planning, so it’s best to call first.

Local landmarks in Upper Sanday

In Upper Sanday, that means homes near Campston, among other places. A little further out are Graemeshall Museum (3.1 miles west). Open spaces near Upper Sanday include Eves Loch.

Map of Upper Sanday © OpenStreetMap contributors

Landlord and trade work in Upper Sanday

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

If you manage property in Upper Sanday, we’ll quote for several properties at once. Send photos for each one and we will price them together.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.