Buckinghamshire · England
Bath re-enamelling & resurfacing in Upton, Buckinghamshire
Bath re-enamelling in Upton without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Bath re-enamelling at your home in Upton
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are worn patches where water runs and sits and a roll-top that’s seen better days.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Upton (HP17)
- Area hub
- Buckinghamshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Upton
For anyone letting property in or around Upton, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Places near Upton
Also in Upton
How to look after the repair
To keep it looking its best:
- Don’t leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Your questions about bath re-enamelling in Upton
What areas do you cover?
The whole UK, including all of Buckinghamshire. Send your postcode with your photos and we’ll offer you dates.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens after I send photos?
We come back with a fixed price. You’re under no obligation.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Access to the area
- The material
- How many items we do on one visit
- The colour and finish to match
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- The postcode, so we can plan the visit
- Any details about the material
- Daylight if possible, and no flash reflection
- A picture taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
About Upton
Upton is about 3 miles south-west of Aylesbury, in Buckinghamshire. Wherever you are in the HP17 postcode area, we carry out the work at your property. We cover 263 places across Buckinghamshire. Our jobs stretch from Upton to London (about 40 miles away).
Our technicians cover all of HP17. We regularly work on streets such as Homestead Close, Lower Farm Gate and Upton Road and the roads around them. Neighbouring places we cover include Dinton (1 mile south-west), Ford (1 mile south), Sedrup (2 miles east), Bishopstone (2 miles east) and Walton Court (3 miles east). Within a short drive, we also cover Aylesbury (3 miles north-east), High Wycombe (13 miles south-east), Chesham (13 miles south-east), Buckingham (15 miles north), Amersham (15 miles south-east) and Elmhurst (4 miles north-east).
Local landmarks in Upton
Our clients here include homes close to The Seven Stars Public House, Stone Church of England Combined School and Church of Saints Peter and Paul, among other places. For rail, the closest station is Aylesbury Vale Parkway station, about 2.5 miles north of the centre. Other landmarks nearby include Roald Dahl Children's Gallery (3.2 miles north-east) and St John's Hospital (less than half a mile north-east). The countryside around Upton includes Snakemoor.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a full day. We clean up when we are done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Tell us about parking, stairs or access
How to get a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
Why repair rather than replace?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the day after. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- Work done at your home or business
- No need to remove anything
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
Take a look at our full price list or guide to resurfacing and replacement costs.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Signs you need bath re-enamelling in Upton
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- Worn patches where water runs and sits
- A coating lifting around the plughole
- Stains that won’t shift
- Enamel that is lost its shine and feels rough
Comparing quotes
- Who will actually do the work
- What protection goes down before work starts
- Whether they match the colour on site
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
