Rotherham · England
Bath re-enamelling & resurfacing in Wales, Rotherham
Fixed-price bath re-enamelling in Wales and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Wales and the surrounding area
Wales is about 6 miles north-east of Staveley, in Rotherham. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover 71 places in Rotherham, from the larger towns to small villages. Our jobs stretch from Wales to Leeds (34 miles away).
We cover every part of the S26 postcode area and the streets around it. We regularly work on streets such as Sycamore Avenue, Lodge Hill Drive and Old Quarry Avenue. We also cover the places around Wales: Kiveton Park (1 mile east), Woodall (1 mile south), Todwick (1 mile north-east), Harthill (2 miles south-east) and South Anston (2 miles east). Further out, we also cover Rotherham (7 miles north-west), Rawmarsh (9 miles north), Maltby (7 miles north-east), Dinnington (4 miles north-east), Clifton (7 miles north-west) and Swinton (10 miles north).
Landmarks near Wales
In Wales, that means homes near Church of St John the Baptist, Wales Primary School and Wales High School. The nearest railway station is Kiveton Bridge station, about 0.6 miles east. Other landmarks nearby include Crystal Peaks (2.9 miles west) and Rotherham General Hospital (5.6 miles north-west).
About our bath re-enamelling in Wales
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair Victorian roll-tops, acrylic baths and cast iron baths, and the jobs we see most are enamel that’s lost its shine and feels rough and lots of chips and rust spots.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Wales (S26)
- County
- Rotherham
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
What we’re called out for in Wales
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The things customers usually mention when they call include:
- A dull, rough surface that won’t come clean
- Wear marks under the taps
- A coloured bath you want in white
- Brown or grey marks that do not clean off
Questions to ask before you book
- A fixed quote, and whether VAT is included
- What aftercare is recommended
- Whether the price covers travel
- How soon you can use it again
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Wales. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- The material
- Doing more than one item at once
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Quotes from your pictures
You can usually get a fixed quote without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Wales
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Advice
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Nearby places to Wales
What else we do in Wales
Aftercare tips
Aftercare is simple:
- Don’t let dyes or oils sit on the finish
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
Common questions in Wales
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you quote from pictures?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is there a guarantee?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
About our accreditations · Every repair comes with a one-year guarantee.
