Lancashire · England
Bath Re-enamelling in Walton-le-Dale
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Walton-le-Dale. Free, fixed quotes from your photos.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Where we work around Walton-le-Dale
Walton-le-Dale is about 1 mile south of Fishwick, in Lancashire. Our technicians come to clients in Walton-le-Dale and nearby villages, so nothing has to leave your home. Walton-le-Dale is one of 482 places in Lancashire we cover. You can also see our page for Manchester, about 26 miles away.
Our repair technicians cover all of PR5 and the streets around it. Jobs here include addresses on Knot Lane, Regent Road and Chorley Road and the roads around them. Main roads around Walton-le-Dale include the A675, which makes travel easy. If you’re just outside Walton-le-Dale, we cover Higher Walton (1 mile east), Fishwick (1 mile north), Bamber Bridge (1 mile south), Lostock Hall (2 miles south-west) and Deepdale (2 miles north-west). Further out, we also cover Chorley (7 miles south), Lytham St Anne's (14 miles west), Accrington (12 miles east), Leyland (4 miles south), Fulwood (4 miles north-west) and Clitheroe (14 miles north-east).
Local landmarks in Walton-le-Dale
Our customers here include homes close to Avenham Park, Christ The King Catholic Maths and Computing College and Yew Tree Inn, among other places. Other local landmarks include St Leonard's Church (less than half a mile north-west), St Patrick's Roman Catholic Primary School (less than half a mile east) and Walton-le-Dale High School (0.8 miles south-east). The nearest railway station is Bamber Bridge station, about 1.3 miles south of the centre. Other landmarks nearby include Preston Royal Infirmary (1.8 miles north-west) and Penwortham Castle (2.4 miles west). For a walk, there is Brockholes.
- Parks and local facilities nearby include Tulketh (2.3 miles north-west)
About our bath re-enamelling in Walton-le-Dale
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with worn patches where water runs and sits and a coating lifting around the plughole, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Walton-le-Dale (PR5)
- County
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Walton-le-Dale
Other services in Walton-le-Dale
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow most of the day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say right away if a repair is the right fix.
Advice
Landlord and trade work in Walton-le-Dale
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
When to call us in Walton-le-Dale
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The most common problems we’re called about are:
- Wear marks under the taps
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
What to look for in a quote
- A fixed quote, and whether VAT is included
- How your room will be protected
- How long it needs to cure
- Whether there are any call-out or travel charges
Your questions about bath re-enamelling in Walton-le-Dale
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
What areas do you cover?
All of Lancashire, and the rest of the UK. Travel is included in the price.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- Any earlier repairs that need removing first
- What the surface is made of
- Doing more than one item at once
- How many areas need work
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- What it’s made of, if you know
- Where you are, by postcode
- A picture taken from further back
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Repair dripping taps early
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When a repair is not the answer
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we’ll say what we think.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
