Lancashire · England
Bath re-enamelling & resurfacing in Higher Walton, Lancashire
Bath re-enamelling across Higher Walton and nearby, usually in one visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Chips and rust in more than one place
How we handle bath re-enamelling in Higher Walton
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We work on cast iron baths, Victorian roll-tops and acrylic baths, and people most often call us about a coating lifting around the plughole and a period or roll-top bath worth keeping.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Higher Walton (PR5)
- Area hub
- Lancashire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When a repair is not the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- Holes rusted through the metal
If in doubt, send photos and we will say what we think.
Materials we work on in Higher Walton
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Our work in Higher Walton
Higher Walton is about 1 mile north-east of Bamber Bridge, in Lancashire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 482 places across Lancashire. Our jobs stretch from Higher Walton to Manchester (25 miles away).
We cover every part of the PR5 postcode area and the streets around it. That includes homes on Blackburn Road, Church Street and Brook Street and the roads around them. If you are just outside Higher Walton, we cover Coupe Green (1 mile east), Walton-le-Dale (1 mile west), Gregson Lane (1 mile south-east), Bamber Bridge (1 mile south-west) and Roach Bridge (1 mile north-east). Within a short drive, we also cover Preston (3 miles north-west), Chorley (6 miles south), Lytham St Anne's (15 miles west), Accrington (11 miles east), Leyland (4 miles south-west) and Fulwood (4 miles north-west).
What’s near Higher Walton
We visit homes around The Oak pub, All Saints Church and Walton-le-Dale High School, among other places. For rail, the closest station is Bamber Bridge station, roughly 1.3 miles south-west of the centre. Well-known places in the area include Penwortham Castle (3.5 miles west) and Preston Royal Infirmary (2.7 miles north-west). For a walk, there’s Brockholes.
What we do, step by step
We work cleanly and quietly. We protect the area first, then the work takes most of the day. At the end we talk you through how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Common questions in Higher Walton
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Are there extra charges for Higher Walton?
We don’t add a call-out fee. Your fixed price includes everything.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you quote from pictures?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
How do I book?
Use the quote form or ring 0345 017 0787.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Higher Walton. What changes the price is:
- Any earlier repairs that need removing first
- What the surface is made of
- Where the damage is and how we get to it
- How hard the colour is to match
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Phone pictures are fine, there is no need for anything special. Ensure they show:
- What it’s made of, if you know
- Details of any past repairs
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
Upload photos of the damage and a wider shot of the entire item, with your PR5 postcode, and we’ll reply with a fixed quote.
Nearby places to Higher Walton
What else we do in Higher Walton
Repairing versus replacing in Higher Walton
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- CHAS and Constructionline accredited
- Same prices wherever you are
- A year’s guarantee on all work
- Colour mixed on the day to match
See our prices page or guide to resurfacing and replacement costs.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Looking after it afterwards
Aftercare is simple:
- Wash away dyes and oils after use
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What we are called out for in Higher Walton
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Most people get in touch after spotting something like this:
- Lots of chips and rust spots
- A roll-top that is seen better days
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
Comparing quotes
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- What prep work is covered
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
