Lancashire · England
Bath Re-enamelling in Fishwick
Full bath re-enamelling and resurfacing in Fishwick, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Bath re-enamelling at your home in Fishwick
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include chips and rust in more than one place and an original cast iron bath that needs restoring, in cast iron baths, acrylic baths and basins & shower trays.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Fishwick (PR1, PR2, PR0)
- Area hub
- Lancashire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
How to prepare
- Let us know which floor the room is on
- Clear the area around the damage
- Ensure the area is dry
How to get a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Read more
What we are called out for in Fishwick
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
You may need us if you’ve spotted:
- Lots of chips and rust spots
- An old resurfacing that is failing
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
What your quote should include
- Who turns up on the day
- Whether there are any call-out or travel charges
- What happens if they find more damage
- How long it needs to cure
Fishwick questions
Do you come to Fishwick?
We do. Repair technicians travel to Fishwick from across the region, with no extra charge for travel.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Where we work around Fishwick
Fishwick is about 1 mile east of Preston, in Lancashire. Wherever you are in the PR1 postcode area, we come to you. We work in all 482 towns and villages across Lancashire. Our nearest city page is Manchester, about 27 miles away.
Our visits in PR1, PR2 and PR0 work the same way as everywhere else we cover. Whether you live on Oxley Road, Rydal Road and Arnhem Road or anywhere nearby, we can come to you. If you’re just outside Fishwick, we cover Deepdale (1 mile north-west), Ribbleton (1 mile north), Preston (1 mile west), Walton-le-Dale (1 mile south) and Brookfield (1 mile north). Within a short drive, we also cover Chorley (8 miles south), Lytham St Anne's (14 miles west), Accrington (13 miles east), Leyland (5 miles south), Fulwood (3 miles north-west) and Clitheroe (13 miles north-east).
Landmarks near Fishwick
Typical jobs here are in homes near Minster Church of Saint John the Evangelist, Winckley Square and St Matthew's Church, among other places. Also close by are Christ The King Catholic Maths and Computing College (1 mile south-west), The Lamb Hotel And Shop Adjoining To The Right (0.9 miles west), Eden Boys' School (0.6 miles west) and Preston St Matthew's Church of England Primary School (under half a mile north-west). The closest station to Fishwick is Preston station, roughly 1.6 miles west of the centre. A little further out are Penwortham Castle (2.2 miles west) and St George's Shopping Centre (1.3 miles west). The countryside around Fishwick includes Brockholes.
- Parks and local facilities nearby include Tulketh (1.7 miles west)
Towns and villages near Fishwick
Other services in Fishwick
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there is no premium for Fishwick. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Typically one visit, start to finish
- We leave the room as we found it
- Everything repaired in place
- Honest advice, even when it means no job
Read our pricing or guide to resurfacing and replacement costs.
What affects the price in Fishwick
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- The size and number of damaged areas
- How easy the damage is to reach
- The material and finish
- Doing more than one item at once
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- What it’s made of, if you know
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- One picture of the whole bath
If you are in Fishwick and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
